Production Engineering - Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Carts, Cabinets and Stainless Steel

To get this entire section as a printable PDF document click here

Truckload carts sale - $475 each

1
2
3
4
5
6

Shipping weight is about 200 pounds each.

Unknown stainless - $175 each

List: $525. MedCon: VG. Unknown stainless steel, either for a surgical table mounting, an equipment pedestal, or ?.

Features:

3 mm thick stainless steel
brackets for securing strap
four slots for screw mount, may be used as pedestal or on side with wall attachment

Overall dimensions of the unit:

width: 13.25 in.
depth: 8
height: 11

Shipping weight is about 15 pounds. 4 units in stock.

Special procedures stainless cart - $875

List: $2,135. MedCon: VG. Equipment or supply cart, no manufacturer's tag. In the photographs to the left there are reflections on the stainless steel which makes it hard to judge the state of the finish. Actual finish shows very light scratching that stainless steel is susceptible to in cleaning, but there are no dents or pocking. Stainless is otherwise finished to a mirror, pharmaceutical grade finish for ease of cleaning.

Features:

stainless steel construction
top work surface (at 43.5 inches high) and bottom shelf are 25.5 x 16 inches
cabinet has double doors and 10 x 25 and 15 x 25 inch shelves
top drawer has six compartments, 2.5 inches deep
rolls on four casters

Overall dimensions of the unit:

width: 26 in.
depth: 16
height: 49.5

Shipping weight is about 65 pounds.

Multi-purpose stainless case cart - $575

List: $2,600. MedCon: VG. Blickman model CCC2 medical supplies cart.

Features:

closed stainless steel cart designed for provision of medical supplies in container systems or stackable on wire shelving
15 cubic feet useable interior space
one pull-forward shelf, 32.5 x 24 inches
latched doors
transport handle
side of cart has sheet holder for inventory documents
wrap-around bumper
four smooth-rolling 6 inch casters

Overall dimensions of the unit:

width: 41 in.
depth: 29
height: 40

Shipping weight is about 200 pounds. 3 units in stock.

Multi-purpose stainless case cart - $576

List: $2,600. MedCon: VG. Blickman medical supplies cart.

Features:

closed stainless steel cart designed for provision of medical supplies in container systems or stackable on wire shelving
two stationary shelves, 35.25 x 22.75 inches
brackets at four levels for shelf placement
latched doors
transport handle
side of cart has holder for small identification tag
wrap-around bumper
four smooth-rolling 6 inch casters

Overall dimensions of the unit:

width: 42 in.
depth: 29
height: 44

Shipping weight is about 200 pounds. 3 units in stock.

Stainless steel medical equipment cart - $575 each

List: $2,340. MedCon: VG. Medical equipment cart.

Features:

stainless steel construction
rolling cart on four casters
two front doors with release latches
four pullout shelves, 20.25 x 22 inches
adjustable-position shelf bracketing
transport handles on right and left sides
wraparound bumper at bottom

Overall dimensions of the unit:

width: 53 in.
depth: 27
height: 48

Shipping weight is about 200 pounds. 3 units in stock.

Stainless steel case cart - $575 each

List: $3,450 each. MedCon: VG. Stainless steel case carts.

Features:

2 interior full length adjustable height stainless shelves
dual locking doors
on 4 steerable castors
Overall dimensions are about 4 feet wide, 4 feet high, 2 feet deep.

Shipping weight is about 300 pounds.

Treatment cart / pharmacy cabinet - $575 each

List: $2,600. MedCon: VG. Lionville model 800 treatment cabinet. 120 V, 60 Hz.

Features:

rolling treatment cart with computer accommodation (pull-out keyboard, monitor brace, locking bin in back can hold a computer tower)
equipped with two shallow (2.5 inch) and one deep (9 inch) drawers
spotlight for top work surface
AC power bar
uses battery or AC power
program keys and drawer lock (timed lockout capable)
transport handle
cup holder
waste bin

Photographs of the keyboard, charging indicator, lockout instructions.

Also available: one unit each equipped with extra single level or 3 level pharmacy drawers with interior dividers

Overall dimensions of the unit:

width: 22.5 in.
depth: 23
height: 42.5 ( 56 to monitor brace)

Shipping weight is about 200 pounds. 6 units in stock.

Endoscopy tower - $475

List: $3,600. MedCon: VG. Medi-Mech model 1000-1 endoscopy tower with monitor.

Features:

rolling unit on 5 castors
front of unit has two compartments with drop-down locking doors
- two shelves in top compartment
- shelf and drawer in bottom compartment
two locking doors on back side for access to back of instruments
right and left side transport handles
cord wrap
Sun Microsystems model GDM-20E20 18 inch diagonal monitor, 100-240 V, 50-60 Hz.
- see above photo showing control panel features
- monitor takes universal power cord and has a 10-pin connector for signal input
- monitor is mounted on a swivel pedestal (270°) with tilt cradle

Overall dimensions of the unit:

base: 31 x 31 in.
height: 54 (74 with monitor)

Shipping weight is about 200 pounds.

Stainless steel cart - $450

List: $950. MedCon: VG. Blickman utility cart.

Features:

stainless steel construction
top shelf (35 x 21.25 inches) at 35.5 inches high with containing rim; bottom shelf at 14 inches high
rubber bumper at bottom (shows wear)
four castors

Overall dimensions of the unit:

width: 42.5 in.
depth: 24.75
height: 37

Shipping weight is about 55 pounds.

Equipment or supplies cart - $475

List: $1,180. MedCon: VG. Stainless Equipment Company utility cart.

Features:

stainless steel construction
top shelf (23.5 x 38 inches) at 42 inches high
middle and bottom shelves (20.5 x 36 inches) at 8 and 24 inches high
transport handle
four castors

Overall dimensions of the unit:

width: 40 in.
depth: 24.25
height: 43.5

Shipping weight is about 70 pounds.

Stainless cabinet - $1,750

List: $6,272. MedCon: VG. Medical supplies cabinet, stainless steel construction.

Features:

stainless steel construction
upper cabinet with windowed door and two glass shelves, 28.5 x 14.5 x 13/32 inches
padlock can be attached to upper cabinet
bottom compartment with one stainless steel shelf
quarter-turn handles

Overall dimensions of the unit:

width: 30.5 in.
depth: 17.75
height: 59.5

Shipping weight is about 220 pounds.

Procedure cart - $675 each

List: $1,819. MedCon: VG. HOMED treatment cabinet.

Features:

locking cabinet with two drawers
transport handle on left side
optional retaining rail

Overall dimensions of the unit:

width: 29.5 in.
depth: 18.5
height: 43.5 (plus 3 inches for retaining rail)

Shipping weight is about 112 pounds. 4 units in stock.

Motorized equipment cart - $1,275

List: $9,800. MedCon: VG. Basically this is a cart with 1 motorized axle. Varian Medical Systems Motorized equipment cart, ref. AL20030000. The cart appears to be designed for computers and printing for radiotherapy systems but should be adaptable for many uses.

Features:

two 12V batteries in series provide 24VDC power source and charge from 100-240 V, 50-60 Hz. current; does not include charger.
right top and left top openings (slide-back fold-up doors) for accessing equipment are 15.5 and 20 inches
right front pull up panel provides 16 inch access
bottom left area with hinged door could be used for a computer
tilt bins in front and back can be used for patient records
control panel has stop/reset button to prevent accidental movement, lighted forward/reverse direction indicator, and battery charge indicator
pressure on handle activates movement speed

Overall dimensions of the unit:

width: 55 in.
depth: 31
height: 43

Shipping weight is about 650 pounds.

Endoscopy cart with monitor - $675 each

List: $4,200. MedCon: VG. Stryker Smart cart, model 240-86. 115 V, 60 Hz.

Features:

Sony Trinitron 19 inch color video monitor, model PVM-1943MD on rotating monitor stand with wrap-around restraint
2 locking Plexiglas front windows
3 stationary and one pull-out shelves each with back cord wrap
internal vertical cord guides
2 AC power bars
chart holder on side
side door for equipment access
bottom storage drawer
side transport handles
cord hangar in back
front locking casters
13 foot heavy duty power cord with hospital grade plug

Overall dimensions of the unit:

width: 34.5 in.
depth: 31.5
height: 53 plus 18 for monitor

Shipping weight is about 300 pounds. 3 similar units in stock.

Locking pharmaceutical cart - $475

List: $2,900. MedCon: VG. locking pharmaceutical cart, with four compartments, two on each side. Compartments lock, although purchaser will need to re key the lock.

Cart is about 5 feet tall, 3.5 feet wide, 2 1/2 feet deep.

Shipping weight is about 300 pounds.

Surgery storage cart - $750

List: $3,200. MedCon: ex. Surgical storage cart, with adjustable height wire rack shelves, and 18 supply storage shelves.

Appears to be made by either Hillrom or Metro.

Overall dimensions:

height: 74"
length: 57"
working depth: 19"
overall depth: 27"

Shipping weight is about 300 pounds, although the cart itself weighs in at about 175 pounds.

Endoscopy cart, monitor and printer - $1,275

List: $6,000. MedCon: ex. Endoscopy cart.

Features:

storage drawer
4 shelves for equipment and instruments
monitor support as shown
includes high resolution video monitor, video printer, and power bar

Shipping weight is about 300 pounds.

Endoscopy cart - $675

List: $2,700. MedCon: VG. Wolf endoscopy cart, model 2191. 201.

Features:

keyed lift-in glass doors with magnetic clasps form two compartments with two shelves (20,5 x 21.5 in.) each
each compartment has two sets of three AC outlets forming a common power bar, 120 V, 50/60 Hz.
24.5 x 22.5 in. lipped top with port to accommodate monitor cords
storage drawer at bottom
keyed back access panel
transport handles
two locking casters
cord wrap

Overall dimensions of the unit:

width: 29.25 in.
depth: 27
height: 52.5

Shipping weight is about 200 pounds.

Endoscopy surgery carts - $675 each

1. Olympus
2. Stryker smart cart
2. Stryker smart cart
3. Stryker, 1/2 height Plexiglas door, four shelves, monitor holder
4. Stryker, full height Plexiglas door, four shelves, monitor holder

Shipping weight is about 250 pounds each.

ESU cart - $375 each

List: $622. MedCon: G. Valleylab ESU cart.

3 units in stock.

Shipping weight is about 75 pounds.

© Copyright 1993 - 2013 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482