Production Engineering - Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Gurneys / transports

Ambulance gurneys - $1,475 each

List: $4,270. MedCon: G. Ferno-Washington ambulance style emergency transport and rescue stretcher.

Features:

• large pad
• patient retention straps
• adjustable tilt back support
• single man operation collapsible legs
• total handle
• side rails

1. This style has a service made rigid backboard built into top of gurney. Unit is shown both with and without pad for clarity.
2. This unit has an adjustable tilt back support, and a straight leg support. Shown both with and without pad for clarity.
3. Similar to units above, but has adjustable tilt leg support, and tow handle. Unit also has a built in collapsible IV pole. Shown both with and without pad for clarity.

Shipping weight is approximately 125 pounds each, actual weight is about 75 pounds each. 6 units totall in stock.

PACU stretcher - $1,975

List: $9,800. MedCon: VG. Hill-Rom general procedure stretcher, model 886.

Features:

• 77 x 31 x 5 in. pad
• bed height (with pad) adjustable from 29 to 42.5 in.
• easy grip handle to raise head and set Trendelenberg positioning
• crank for knee elevation
• push lever to release slide-in side rails
• brake can be set from any wheel
• iv pole
• fifth wheel glide
• tilt indicator

Overall dimensions of the unit:

• width: 82 in.
• depth: 31
• height: 29

Shipping weight is about 250 pounds.

ER/OBGYN/ PACU gurneys - $1,750 each

List: $8,725. MedCon: VG. Stryker model 946 -3 PACU bed.

Features:

• hydraulically operated adjustable height
• normal/reverse Trendelenberg
• locking castors
• built-in storage tray
• built-in oxygen bottle holder
• adjustable leg support
• adjustable patient tilt back support
• collapsible side rails
• foldaway push bar
• units new September 1988
• built-in retractable sidestep, for shorter personnel

Shipping weight is about 300 pounds each. 6 units in stock.

Hydraulic gurney - $1,475

List: $6,700. MedCon: VG.

Midmark model 525/520.

Features:

• height adjustment by T-pedal
• adjustable tilt back support
• flip-up side rails
• normal/reverse Trendelenberg
• locking wheels
• bottom basket
• iv pole

Overall dimensions of the unit:

• width: 32 in.
• depth: 80
• height: 29

Shipping weight is about 350 pounds.

Emergency room stretcher - $1,475

List: $6,700. MedCon: G. Stryker model 926-1 emergency department stretcher

Features:

• accommodates 22 x 74 in. pad
• bed height can be raised from 26 to 36 in. by hydraulic lift operated by foot pump
• adjustable tilt back support and knee bend
• slide-away side rails
• normal / reverse Trendelenberg
• holds both D and E sized oxygen bottles
• 4 locking castors
• large underneath storage shelf
• accepts equipment shelves and IV poles (includes 1 IV pole)

Overall dimensions of the unit:

• width: 29 in.
• depth: 83
• height: 26

Shipping weight is about 350 pounds.

OB/GYN trauma stretcher - $3,750 each

List: $13,120. MedCon: VG. Stryker model 1060 OB/GYN trauma stretcher, for emergency room, ER and labor/delivery use.

Features:

• extendable stirrups
• retractable side rails
• retractable transport handles
• hydraulically operated through foot pedal
• adjustable bed height from 27-40 inches (including pad)
• normal/reverse Trendelenberg
• steer, neutral and break positions
• built in IV pole
• built in patient transport board, SAFR

Shipping weight is about 400 pounds each, 3 units in stock (one unit missing pads, one unit missing stirrups).

Critical care unit CCU bed - $2,975

List: $9,780. MedCon: EX. Stryker model 1998-1 CCU critical care unit bed. Also referred to as an extra wide gurney.

Features:

• hydraulic up/ down
• normal/reverse Trendelenberg
• collapsible side rails
• built-in oxygen bottle holder
• built and collapsible IV pole
• locking /steerable castors
• adjustable tilt back support
• adjustable leg support
• new June, 1991

Shipping weight is about 400 pounds.

GPS General procedure gurney - $2,475

List: $8,900. MedCon: EX. Hill-rom model 881 GPS general procedure stretcher.

Features:

• adjustable height, hydraulic
• locking castors
• collapsible side rails
• collapsible push bar and head end of gurney
• normal and reverse Trendelenberg
• unit goes very low to the ground, about 24 inches
• tilt back support

Shipping weight is about 375 pounds.

PACU gurney - $1,950 each

List: $8,780. MedCon: ex. Stryker PACU bed, with one half length radiolucent top

Features:

• hydraulic up/down
• normal/reverse Trendelenberg
• mechanically adjustable back support, adjusts from foot end of bed
• mechanically adjustable leg support, adjusts from foot end of bed
• collapsible side rails
• steer/brake lever
• built-in, collapsible push bar at head end of bed and
• built in collapsible IV pole
• built in oxygen bottle holder
• built-in storage shelf

Shipping weight is about 350 lbs. each. 4 units in stock.

Patient shifter - $600

List: $1300. MedCon: ex. Ferno Washington patient shifter. used to transfer patients from wherever they may be, such as the ground, onto either a gurney or ambulance or other conveyance. Unit is shown assembled. It has two halves that are positioned on either side of patient. These then slide under patient and clip together. Restraining straps keep patient on unit. adjustable in length, to about 7 ft. long.

Shipping weight is about 75 lbs., although the unit weighs maybe half that.

Procedure / ENT Gurney - $1,750

List: $7,800. MedCon: VG. Stryker model 946 LTD 2 gurney. This is a regular gurney, except that the table top slides about 3 feet toward one end of the gurney for better access.

Features:

• extended table surface
• top has both adjustable head and foot rests
• with 5th steering wheel
• normal / reverse Trendelenberg
• collapsible side rails
• locking/steerable castors
• built in underneath storage cabinet

Shipping weight is about 300 pounds.

PACU trauma gurney - $2,750

List: $11,230. MedCon: EX. Stryker model 946-2 PACU care gurney. This unit has the normal features of a gurney, plus it has a top that provides back support and leg support as with a hospital bed. Unit is in excellent functional and cosmetic condition.

Features:

• Hydraulic up / down
• normal/ reverse Trendelenberg
• crank actuated tilt back support
• crank actuated leg curl support
• dual swing away side rails. Rails lock in vertical down, horizontal flat and vertical up positions
• on 4 castors, that either steer or lock in brake position
• built in oxygen bottle holder
• built in IV pole holders

Shipping weight is about 300 pounds.

Patient trolley - $700

List: $2,850. MedCon: VG. Arjo patient trolley. This lift adjusts from a full reclining position to various angels of back and leg support. raises and lowers by a hydraulic foot pump.

2 units in stock.

Radio-lucent Emergency room stretcher - $1,750 each

List: $7,200. MedCon: VG. Stryker model 926-1 emergency room stretcher. New In 1988, with rebuilt hydraulics. Full length radiolucent top, with full travel cassettes holder. The cassette holder will hold any size cassette up to 14 x 36", and the holder travels the full length of the gurney so that any part of patient may be x-rayed.

Features:

• Full length radiolucent top
• full travel X-ray cassette holder with locking arm
• adjustable tilt back support
• all hydraulic motions
• normal / reverse Trendelenberg
• holds both D and E sized oxygen bottles
• 4 locking castors
• hydraulic up/down, operated through foot pump.
• large underneath storage shelf, for personal belongings, X-ray cassettes, etc.
• accepts equipment shelves and IV poles (includes 1 IV pole)

2 units in stock.

Table and gurney accessories

• MedCon: EX. Collapsible 2 place IV pole, also tilts down, on side channel clamp. Midmark s/n TO16287 and TO16612. 2 in stock. $275 each
• MedCon: N. Clip on seat cushion, brown, probably Midmark, $85
• MedCon: EX. Arm rests. Clamp to side of channel, clamp mechanism is integral to arm support. 5 pair in stock. Red brown, brown and 2 tone, pink over white plastic. Midmark, s/n TO11147 and others. $325 per pair.
• MedCon: N. Hausted, threaded pole for gurney, about 18" long, stainless, 12 in stock - $25 each
• MedCon: N. IV pole bracket, built into end bumper for gurney. Hausted, 7 in stock - $45 each
• MedCon: N. Amsco 1080 channel clamps, 2 in stock, $75 each
• MedCon: VG. Surgical tale stirrups, Amsco and others, for orthopedic, surgical and other tables. Stirrups are adjustable in length, with back of knee support. 9 in stock, $375 per pair
• MedCon: EX. Leg supports, Hillrom adjustable leg pad with holder, $175 / pair
• MedCon: EX. Midmark knee support, small, with table clamps. $325 / pair
• MedCon: EX. Lock in stirrups OBGYN style, for gurney. Looks similar to exam table OBYGN type stirrups, with adjustable pin clamps. 3 pair in stock, $225 / pair.
• MedCon: F. Leg stirrups for hydradjust and other urology tables, no clamps, adjustable and an rotation. Probably Liebel Flarsheim. $375 per set.
• MedCon: EX. 4 sets leg stirrups for Hillrom birthing bed, with adjustable support. $375 per pair

© Copyright 1993- 2008 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482