Production Engineering - Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Laboratory hoods

Fume hood - $1,975

List: $8,300. MedCon: VG. Hamilton Vectaire fume hood. 120 V, 60 Hz.

Features:

• 62 x 23.5 inch work area
• window opens for 30 inch high access
• vacuum, air, and gas spigots on right and left sides; cold water on left side
• drain on left side
• 12 inch diameter top vent
• fan and light switches
• two F40W T12 fluorescent rapid start lamps

Overall dimensions of the unit:

• width: 72 in.
• depth: 34
• height: 54.5

Shipping weight is about 450 pounds.

Laminar flow hood--Repairman's special - $975

List: $11,200. MedCon: F. Labgard NuAire 6 foot hood. Glass access door was cracked during shipment to our warehouse. Replacement should provide a fully functioning unit.

Features:

• LabGard control panel has vacuum gauge and blower and light switches
• 70 x 17 inch work pan
• gas and air spigots
• 2 AC outlets
• light fixture on inside back wall

Overall dimensions of the unit:

• width: 74.5 in.
• depth: 33
• height: 75

Shipping weight is about 550 pounds.

Countertop fume hood - $475 each

List: $1,900. MedCon: VG. PCI model with G25 hood. 110-120 V, 50/60 Hz.

Features:

• Plexiglas front panel, 12.5 inch access, or 20 inch with hinged panel up
• we have two units with plastic sides (right photo) and one unit with Plexiglas on sides (left photo)
• PCI F251 filter, 12 x 24.5 x 2.75 inches in cardboard support
• lifting handles on one unit; could be added to others
• power on/off rocker switch
• 9 foot power cord with hospital grade plug

Overall dimensions of the unit:

• width: 26.75 in.
• depth: 24
• height: 32

Shipping weight is about 80 pounds. 6 units in stock.

Bio safety hood - $3,275

List: $19,800. MedCon: EX. Baker BioGard 4 foot biosafety hood, model B40ATS. 115 V, 60 Hz. 20 Amp power plug

Features:

• rolling floor unit with transport handle
• vertical laminar air flow
• fluorescent and germicidal lights
• air spigot; 3 additional spigot ports
• electrical receptacle with two outlets
• 46 x 12 inch working access, face shield unbolts and pulls forward for 22 inch vertical access
• work surface is 46 x 18 inches

views of the interior, control panel, top filter compartment and side transport handle, spigot ports and 20 Amp power cord plug

Overall dimensions of the unit:

• width: 55 in.
• depth: 32.5
• height: 79

Shipping weight is about 800 pounds.

Bench top laboratory hood - $2,875

List:$11,300. MedCon: VG. Baker Biogard 3-foot hood, model B-315. 115 V, 60 Hz.

Features:

• working access 35 x 8 inches, face shield unbolts and pulls forward for 21 inch vertical access
• vertical laminar air flow
• fluorescent and germicidal lights
• electrical receptacle with two outlets
• working surface pan with lip, 33 x 14 inches
• vacuum and gas spigots

views of the interior, control panel and top filter compartment

Overall dimensions of the unit:

• width: 39 in.
• depth: 27.5
• height: 57

Shipping weight is about 500 pounds.

Laboratory hood - $975

List: $3,200. MedCon: VG. Baker EdgeGard model EGB-3252 laminar flow clean bench. 115 V.

Features:

• 1/3 hp blower
• stainless steel work surface and HEPA filter behind stainless steel grid
• fluorescent light with 200 foot-candle illumination at work surface
• hanging rack
• AC outlet
• on/off toggle switches for blower and lights
• 6 foot heavy duty power cord with hospital grade plug

Working area of the hood:

• width: 34 in.
• depth: 21.5
• height: 28

Overall dimensions of the hood:

• width: 40 in.
• depth: 34.5
• height: 55.5

Shipping weight is about 350 pounds.

Laboratory hood - $975

List: $3,200. MedCon: VG. Baker EdgeGard model IV-22 Space Saver laminar flow clean bench. 115 V.

Features:

• stainless steel work surface and HEPA filter behind stainless steel grid
• fluorescent light with 75 foot-candle illumination at work surface
• on/off toggle switches for blower and lights
• hanging rack
• 8.5 foot power cord with hospital grade plug

Working area of the hood:

• width: 21.75 in.
• depth: 15.5
• height: 22

Overall dimensions of the hood:

• width: 28 in.
• depth: 27
• height: 43

Shipping weight is about 250 pounds.

Glutaraldehyde user station - $800

List: $1,675. MedCon: EX. PCI Medical glutaraldehyde user station. 110-120 V, 50/60 Hz.

Features:

• mobile station with two locking casters and transport handles on each side
• 24 x 18 in. work area
• hinged access shield lifts for inserting large containers
• disposal pump
• two covered reagent containers
• spare filter

Overall dimensions of the unit:

• width: 21 in.
• depth: 28
• height: 60.75

Shipping weight is about 100 pounds.

Laminar flow hood - $2,275

List: $8,250. MedCon: VG. Contamination Control Inc. model 760 biological hood. 125 V. Although this has the same model number, it is somewhat different than our other listing for the same model, with the addition of a magnehelic pressure display.,

Features:

• internal work area has 17.5 x 69.5 in. stainless steel tray
• internal AC outlet
• gas spigots on both right and left sides
• blank entry holes on both right and left sides where additional air spigots could be added
• Plexiglas shield unlocks and swings forward
• uv lamp
• drain valve
• 1/2 hp blower motor
• blower gauge

Overall dimensions of the unit:

• width: 77 in.
• depth: 33
• height: 82 plus 2 in. optional legs

Shipping weight is about 600 pounds.

Vapor containment system - $1,375

List: $5,250. MedCon: G. Gen-Med universal vapor containment system, model 46-2004. 120 V, 60 Hz. Some rusting.

This unit is similar to a fume hood, except that the design allows 360° of unobstructed viewing of the objects being handled.

Features:

• rolling unit with lipped work surface under Plexiglas hood
• bottom storage area with sliding doors
• air flow exits through filter and sheet metal vent
• audible and visual low air flow alarm
• recessed transport handles

Overall dimensions of the unit:

• width: 36 in.
• depth: 27
• height: 60

Shipping weight is about 200 pounds.

Laboratory hood - $3,750 each

List: $8,300. MedCon: ex.

Nuair Inc. model 408 OA laboratory hood.

Features:

• model 408
• built-in magnehelic, indicating 0-2 inches of water
• built in interior lights
• dual electrical outlets
• dual gas outlets, currently set up for suction and oxygen
• built-in plenum drain
• outlets have an on off switch
• our circuit breaker
• outlet circuit breaker
• blower on/off switch
• digital controls

Overall height on stand is about 7 feet tall.

Interior working dimensions:

• 30 inches deep
• 36 inches wide
• 30" high (without stand)

Shipping weight is about 450 pounds.

Glovebox - $1,275

List: $3,700. MedCon: G. Stainless steel and leaded glass glovebox. Has a crack in the glass, otherwise would be rated in excellent condition. Unit removed from nuclear pharmaceutical manufacturing facility. Glass flips up, as shown, for entry and exit of samples and work pieces. unit unit has ventilation connections as shown. In use, samples and work are placed inside the box, then the glass is closed and sealed, then items may be handled inside the box in a sealed environment. Box could also be used as filled with an inert atmosphere, for example carbon dioxide or nitrogen, or under negative pressure with a nitrogen or other inert gas flush.

dimensions:

• length: 37"
• width: 28"
• height: 25"

Shipping weight is about 225 lbs.

Laboratory biological fume hood - $1,975

List: $7,800. MedCon: EX. biological hood, made by CCI contamination control Inc., model 760.

Features:

• all stainless steel interior, two gas spigots, two interior AC outlets
• hanging rod to support equipment
• 1/2 horsepower blower
• window has 10 inch opening, pulse forward for additional clearance

internal working dimensions:

• width: 70 inches
• depth: 17 inches
• height: 27 inches

Overall dimensions:

• width: 76 inches
• depth: 33 inches
• height: 74 insisted top of hood, plus an additional 10 inches to top of vent

Laminar flow hood - $1,750

List: $8,200. MedCon: G. Laboratory grade laminar flow hood.

Features:

• built-in blower fan
• provides clean, filtered air flow over work surface
• all stainless steel working surfaces
• built in fluorescent lighting
• built-in hangar hook
• removed from service 1/10/2005

Overall dimensions:

• length: 74 "
• width: 34
• height 71

Interior working dimensions:

• length: 70 "
• width: 21
• height: 28

Shipping weight is about 900 pounds.

Large laboratory hood with drain - $1,850

List: $13,720. MedCon: VG. Large laboratory exhaust hood with drain, made by Envirco.

Features:

• filter ventilation on top of unit
• exhaust vent in bottom of units
• all stainless steel pans and drain as shown
• unit provides both of filtered exhaust above, and drained and ventilated sink below
• all stainless steel work surface
• interior surfaces are all stainless steel
• adjustable airflow, with indicator
• interior illumination by fluorescent lights
• fan unit (orange in photo) removes for ease of moving in and out of lab

Overall dimensions:

• length: 75 in.
• width: 28 in.
• height: 91 in. overall

Inside dimensions:

• length: 72 in.
• width: 26 in.
• height: 26 in.

Shipping weight is about 500 lbs. total.

Laboratory laminar flow hood - $1,475

List: $7,000. MedCon: g. Baker model Edgeguard laboratory fume or laminar flow hood. Self contained unit, with internal gas outlet and stainless steel work surface.

Interior working dimensions:

• length: 21.5"
• width: 46"
• height: 34"

Exterior dimensions:

• length: 33.5"
• width: 50"
• height: 75"

Shipping weight is about 400 pounds.

Portable laboratory hood - $1,275

List: $3,970. MedCon: G. In excellent condition except has damage to movable portion of plexiglass hood, which must be repaired by purchaser (needs a new piece of plexiglass made for it). Nuare animal bedding disposal hood. Units use a disposable HEPA filter, not included with the unit.

Features:

• Stainless steel work surfaced
• clear, strong plexiglass
• built in air flow monitor
• built in lights
• on/switch for fan
• on/off switch for lights
• on wheels for portability
• built in under-counter storage with adjustable height shelves

Outside dimensions:

• 6' 8" high
• 4' wide
• 2' 4" deep

Working dimensions:

• 1' 10" high
• 3' 6" wide
• 2' 3" deep

These units were removed from an installation using lab mice for production purposes. In use, these units were moved to each animal isolation chamber, where a technician removed the bedding from each isolation chamber and processed it under this hood. This hood prevents any material or contaminants present in the bedding material or animal waster from becoming airborne, exposing workers or other test subjects.

Shipping weight is about 300 pounds.

Lab hood - $1,475

MedCon: N. List: $5,300. Hamilton model Vectaire fume hood. 4' wide, contain electrical outlet, filer, 4 gas taps, light and switch. 33" deep, 48" wide, 62" high above counter top. Does not include countertop or stand.

© Copyright 1993 - 2010 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482