PEMED - Production Engineering Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Laboratory incubators and ovens

Vacuum oven - $875

List: $1,900. MedCon: G. Vacuum oven model 3630 by National Appliance. Features:

8 x 8 x 12" deep chamber
exterior dimensions: 14 x 13 x 25" high
see though glass door
inlets and valves for suction, vent, gas 1 and gas 2
temperature range to 50 Deg C
external connections for gases

Unit may be used to heat a sample in vacuum, or several gases (for example, CO2 and nitrogen). Shipping weight is about 60 pounds.

Air-jacketed CO2 incubator - $2,750

List: $8,300. MedCon: VG. Forma Steri-Cult 200 incubator, model 3033. 120 V, 60 Hz.

Features:

stackable units
10 cubic feet capacity
six shelves, 26 x 20 in.
LCD windows and control modules for temperature, temperature alarms, CO2, and relative humidity
temperature range is 4° above ambient to 45°C
alarms for overtemp and CO2 level
door heater
recessed top grip on door for opening
CO2 inlet on back of incubator
3 liter reservoir for humidity control
water overflow drain
recorder output (temperature, RH, % CO2)

Interior dimensions of the chamber:

width: 26 in.
depth: 20.5
height: 32

Overall dimensions of the unit:

width: 40.5 in.
depth: 27
height: 40

Shipping weight is about 350 pounds.

CO2 incubator - $1,975

List: $6,300. MedCon: VG. Baxter/Scientific Products Ultra-Tech FD301SAUA incubator, manufactured by Revco. 115 V, 60 Hz.

Features:

forced draft air flow
double walled with fiberglass insulation
four perforated shelves, 21.5 x 25 in.
10.3 cubic feet capacity
0-20% CO2 with 0.1% set point resolution
LED display of temperature and % CO2
alarms for overtemp and high and low CO2
temperature range is 5° above ambient to 60°C
inner glass door, outer door heater with temperature control dial
CO2 inlet on back of incubator, 15 psig max
humidity control dial and humidification reservoir on the side of incubator
inline replaceable biological filter
power on/off rocker switch
drain outlet
I/O for remote, temperature recorder CO2 recorder

Interior dimensions of the chamber:

width: 25.5 in.
depth: 22
height: 28

Overall dimensions of the unit:

width: 43.5 in.
depth: 28.5
height: 39

Shipping weight is about 350 pounds.

Glove box / anaerobic chamber with internal incubator - $3,750

List: $16,950. MedCon: G. Forma model 1025 glove box. 120 V, 60 Hz. In excellent overall condition, however it needs a new timer switch and catalyst appears to be missing.

Features:

incubator has 2 access doors with latches, middle and bottom shelves and is approx. 16 x 12 x 22 in.
interchange chamber is approx. 1 cubic foot capacity
back of unit has footswitch connector, anaerobic inlet, 10-15 psi, nitrogen inlet, 10-15 psi, and vacuum, 4 cfm to 24 in. Hg.
side compartment interchange
indicator lamps for operations in progress
power strip with 4 AC outlet, one of which may be controlled with foot switch
back has tubing connectors for vacuum, nitrogen, custom anaerobic gas and AC outlet for vacuum pump

Overall dimensions of the unit:

width: 60 in.
depth: 31.25
height: 29.5

Shipping weight is about 425 pounds.

Reach in carbon dioxide incubators - $2,500 each

List: $8,800. MedCon: ex. Forma scientific model 3956 reach in carbon dioxide CO2 incubator.

Features:

built-in strip chart recorder
main power switch on/off
humidity selection, medium/high
carbon dioxide alarm, to/normal/silence
sample port
adjustable temperature limit
indicator lights for over temperature, defeats and carbon dioxide
digital controls for temperature, and and percentage of CO2 concentration

Interior working dimensions:

5' 6"
36 inches wide
36 inches deep

Shipping weight is about 300 pounds each.

2 units in stock. 1 unit has strip chart recorder, the other does not.

Repairman's special laboratory incubator - $475

List: $2,700. MedCon: F. Precision/Thelco model 5DG laboratory incubator. 115 V, 50/60 Hz., 150 W. The incubator heats, but the the temperature display window does not give a reading.

Features:

temperature range of ambient + 5 degrees to 70 degrees C

two shelves, 18 x 15.5 in.
adjustable positioning of shelf brackets
power on/off rocker switch
digital temperature display window
heater on indicator lamp
touchpad arrows to set temperature
recorder output
alarm and mute

inner dimensions of the chamber:

width: 18.5 in.
depth: 15.5
height: 27

Overall dimensions of the unit:

width: 24 in.
depth: 22
height: 40

Shipping weight is about 160 pounds.

Bench top incubator - $475

List: $1,750. MedCon: VG. Bellco bench top incubator, catalog no. 7728-56205. 115 V, 60 Hz.

Features:

full view door
primary and safety temperature control dials with indicator lamps
temperature gauge to 65° C ( 150° F)
on/off rocker switch with orange indicator lamp

Interior dimensions:

width: 29.5 in.
depth: 14
height: 20

Overall dimensions of the unit:

width: 32.5 in.
depth: 19
height: 27.5

Shipping weight is about 160 pounds.

Furnace control - $475

List: $1,100. MedCon: G.

Leco Corporation Furnace control, model 774-080. 220 V, 50/60 Hz.

Overall dimensions of the unit:

width: 13.25 in.
depth: 12.5
height: 6.75

Shipping weight is about 20 pounds.

Temperature controller - $475

List: $1,500. MedCon: VG. Klockner Moeller/Honeywell temperature control panel, model B type 9. 115 V, 60 Hz.

Features:

heavy-duty color-coded pushbutton controls for temperature and room lights
digital display of active functions with set point controls
alarm and alarm silence
circular paper graph recorder for hard copy records

Overall dimensions of the unit:

width: 23.5 in.
depth: 8.75
height: 31.5

Shipping weight is about 100 pounds.

Bench top incubator, digitally controlled - $1,275

list: $3100. MedCon: ex. VWR scientific products model 2300 CO2 carbon dioxide incubator.

Features:

on/off switch
digital display of chamber temperature, degrees centigrade
adjustable set temperature for chamber
digital display and control of percentage carbon dioxide atmosphere for chamber
heating on light
heating indicator lightt5
CO2 injection indicator light
CO2 sample port
heated door
inner glass door
all stainless steel chamber

overall dimensions:

width: 23 inches
depth: 23 inches
height: 38.5 inches

Chamber dimensions

width: 19 inches
depth: 18 inches
height: 26 inches

Shipping weight is about 125 pounds.

Bench top incubator - $675

List: $1100. MedCon: demo. Lab Line model L-C incubator. Unit appears to be brand-new, unused, however it does have a few minor cosmetic issues so we have categorized this as demo.

Features:

power on/off switch
control, 0-10
heat cycle indicator lamp
adjustable height selves
Unit is wired for 230/240 VAC, 1.7 amps, 50/60 Hz.

Overall dimensions:

width: 21 inches
depth: 21 inches
height: 34 inches

Interior dimensions:

width: 18.5 inches
depth: 18 inches
height: 26 inches

Shipping weight is about 75 pounds.

Dual chamber CO2 incubator - $1,375

List: $6,200. MedCon: VG. Cedco model 1400 dual chamber water-jacketed CO2 incubator. 120 V, 50/60 Hz.

Features:

digital display of temperature and % CO2
large indicator lights for power on, high limit activated, element energized, door heating and w/j low
small indicator lamps for CO2 low, alarm muted, CO2 high and CO2 on
shelves are 16.5 x 16.5 in.
back of unit has on/off rocker switch, CO2 port and recorder jack

Overall dimensions of the unit:

width: 28 in.
depth: 24
height: 74

Shipping weight is about 450 pounds.

Large chamber water jacketed carbon dioxide incubator - $1,975 each

List: $8,710. MedCon: VG. Forma scientific water jacketed carbon dioxide incubator. Model number 3956, wired for 120 VAC, 60 Hz.

Features:

digital control and display of carbon dioxide concentration
Digital digital control and display of temperature, degrees centigrade
temperature safety setting
indicator lights for heating, over temperature
temperature circular strip chart recorder
high/medium humidity selection control
high/medium/add water indicator lights
CO2 alarm indicator light
CO2 carbon dioxide injection indicator light
gas sampling ports

Exterior dimensions:

width: 38 inches
depth: 32 inches
height: 87 inches

Interior dimensions:

width: 31 inches
depth: 27 inches
height: 16 inches

Unit ships with three adjustable height shelves, not shown in photographs.

Four units in stock, one unit has castors, three do not. Shipping weight is about 400 pounds each.

Water-jacketed CO2 incubator - $1,475

List: $7,200. MedCon: VG. Hotpack model 3103D-1 CO2 incubator. 115 V, 60 Hz.

Features:

approximately 9 cubic ft. capacity
2 shelves not included, not shown in photograph
ambient temperature + 5 degrees to 60 degrees
digital gauges/set modules for temperature, humidity, and CO2 tension
back of incubator has CO2 inlet, water inlet, and two drain outlets
CO2 sample port

Overall dimensions of the unit:

width: 37 in.
depth: 28.75
height: 41

interior dimensions of chamber:

width: 22.5 in.
depth: 21.75
height: 32.5

Shipping weight is about 250 pounds. 3 units in stock.

CO2 incubator - $1,475

List: $3,825. MedCon: VG. VWR model 2200/2250 continuous flow water-jacketed CO2 incubator. 120 V, 50/60 Hz.

Features:

5.5 cubic feet chamber capacity
flow meters reads lpm CO2 and lpm air with thumb wheel sets
large LED temperature display
indicator lamps for heating, door heating, water jacket low, high limit and power on
CO2 purge with solid state timer
CO2 sample port on right side
independent door heater
back of unit has over temp set and air and CO2 inlets
door is hinged on right side and has recessed grip on left side
five stainless steel shelves, 16.5 x 16.5 in.

Overall dimensions of the unit:

width: 23 in.
depth: 24.25
height: 38.5

Shipping weight is about 250 pounds.

Large roll in incubator - $1,975

List: $9,120. MedCon: G. Large floor model role in incubator, made by Bellco.

Features:

mount/with floor, so an entire rack may be rolled into incubator
heated air moves in near bottom and circulates up through interior
full heights double glass door
power on/off switch
digital display of current and set temperatures
interior power outlet on/off switch

Interior dimensions:

width: 35 inches
depth: 26 inches
height: 76 inches

Exterior dimensions:

width: 41 inches
depth: 31 inches
height: 87 inches

Shipping weight is about 500 pounds.

Vacuum oven - $975

List: $1,825. MedCon: EX. LabLine Duo-Vac oven model 3510. 110 V, 50-60 Hz.

Overall dimensions of the unit:

width: 15 in.
depth: 17
height: 24
inner diameter of cylindrical over chamber is 10.75 with a depth of 11.5 in.

Shipping weight is about 55 pounds.

Drying oven - $475

List: $1820. MedCon: VG. VWR Scientific laboratory drying oven.

Features:

ambient-350°
built-in circulating fan
thermometer ports

Interior chamber working dimensions:

length: 24
width: 24
height: 24

Overall dimensions:

length: 32
width: 32
height: 34

Shipping weight is approximately 150 pounds.

Vacuum oven with pump- $1,475

List: $4,216. MedCon: EX. Fisher Scientific model 280 with Fisher 1/4 hp Maxima C Plus vacuum pump.

Features of oven:

120 V, 50/60 Hz.
temperature range of ambient +10 to 200 degrees C
enamel coated steel exterior with stainless steel chamber
glass view door
oven chamber is 12 x 8 x 8 in. (0.45 cu. ft. capacity)
2 aluminum shelves
vacuum gauge reads 0-30 in. Hg

Features of pump:

115 V, 60 Hz
1/4 hp, 3450 rpm
barbed inlet accepts 3/16 and 7/16 in. vacuum tubing
stainless steel valves and baffle plates
carrying handle
non-skid base

Overall dimensions of the oven:

width: 13 in.
depth: 15.5
height: 18

Overall dimensions of the pump:

width: 15.5 in.
depth: 5
height: 10

Combined shipping weight is about 125 pounds.

Blood platelet incubator with shaker - $1,750

List: $8,300. MedCon: EX. Platelet incubator, made by Helmer. used to incubate blood platelet samples during blood banking operations, and quality control for blood banking operations. Model PC3200.

Features:

digital temperature control, to 0.1° C.
digital temperature display, to 0.1° C.
with circular strip chart temperature recorder
includes a linear platelet reciprocator, model LPR-1 made by Mellco engineering.

Overall dimensions:

depth: 27"
width: 41
height: 68

Wired for 115 VAC, 50/60 Hz.

Shipping weight is about 400 pounds.

Laboratory oven - $475

List: 1,640. MedCon: G. Blue M Stabil-Therm gravity convection oven. 110 V. Factory specification of heating limit is 288 degrees C

Features:

temperature control dial
power selector switch
indicator lights for power and heater
2 shelves which can be set in six positions
heavy-duty door latch

Overall dimensions of the unit:

width: 26.5 in.
depth: 25.5
height: 29

Interior dimensions:

width: 18.5 in.
depth: 17.5
height: 14.5

Shipping weight is about 195 pounds.

CO2 incubator - $875

List: $4,450. MedCon: G. Single functioning chamber from Fisher Scientific model 610 dual chamber CO2 incubator. 120 V, 60 Hz.

Features:

water-jacketed
on-off toggles for power, heat and CO2
lockable dials to set chamber temperature and upper limit
lockable dial to set %CO2 and active gassing light
LED display show temperature, %CO2 or scans between the two
alarm lights for high temp and low water
nine shelf slots; three shelves included (16.5 X 16.5 in.)
gas sample port

control panel		back view
open with shelves		manufacturer's plate

Dimensions:

length: 24.5 in.
depth: 27
height: 39

Shipping weight is about 200 pounds.

Dual chamber carbon dioxide CO2 incubator - $1,175

List: $8,300. MedCon: VG. Dual chamber water jacketed incubator, made by Shel Lab.

Features:

individual digital temperature controls for each chamber
water jacketed, with CO2 atmosphere
port for purge gas
with flow meters for CO2 gas
purge timer, 0-60 minutes
heated doors
adjustable height shelves
all stainless steel interior construction
both outer and inner doors

Overall dimensions:

length: 49 inches
width: 23 inches
height: 38 inches

Inside chamber dimensions:

length: 18 1/2 inches
width: 18 1/2 inches
height: 25 1/2 inches

Shipping weight is about 275 lbs.

Dual chamber water jacketed incubator with stand - $975

List: $7,250. MedCon: VG. dual chamber water jacketed incubator with stand, made by national appliance, model 3312-11.

Features:

dual chambers
adjustable temperature control, range is ambient - 70° C.
with temperature gauge, readout in degrees C
storage cabinet has two shelves as shown
each chamber has an interior glass door, and adjustable stainless steel shelves

Overall dimensions of incubator:

length: 46.5
width: 44.5
height: 36.5

Interior dimensions of each incubator chamber:

length: 18
width: 18.5
height: 26

Overall dimensions of cabinet:

length: 46.5
width: 25
height: 32

Shipping weight is about 400 lbs.

Large laboratory oven - $1,300

List: $5,390. MedCon: ex. Blue M large laboratory oven.

Features:

oven temperature range control
temperature gauge, range of temperature is low- high
all stainless steel interior
circular strip chart recorder mounted on top of unit
has two sampling events located on left side
positive latching door
on rack with castors, as shown

Overall dimensions:

length: 29
width: 36
height: 63

Interior dimensions:

length: 20
width: 20
height: 18

Shipping weight is about 500 lbs.

Laboratory oven - $750

List: $2,300. MedCon: VG. Blue M electric company, Stabilatherm constant temperature oven.

This unit uses a forced air fan to make sure that the temperature is even throughout, rather than relying solely on gravity. Features:

temperature range: ambient to 500°F
adjustable temperature
stainless steel interior
one adjustable position shelf
2 access ports, plus thermometer port

Outside dimensions:

length: 24"
width: 27.5"
height: 37"

Shipping weight is approximately 200 lbs.

Incubator - $145 each

List: $375. MedCon: G. Small bench top incubator, with shelves, for incubating a few dishes or slides.

2 units in stock.

Shipping weight is about 30 pounds each.

Digitally controlled laboratory oven - $1,475

List: $4,240. MedCon: Ex. VWR scientific products microprocessor controlled oven, model 1330 FM. Digitally controlled laboratory oven with a Range of 20 through 270 °C.

Features:

Digitally controlled timer
digitally controlled temperature setting
digitally controlled temperature display
elapsed time display
over temperature protection
over temperature activation warning light
timer on / off switch
power on / off switch

Outside dimensions:

depth: 20 in.
width: 21 in.
height: 36 in., to top of vent

Inside dimensions:

depth: 15 in.
width: 13 in.
height: 14.5 in.

Unit has two adjustable height stainless steel shelves. Interior is all stainless steel, with a mirror finish.

Shipping weight is approximately 100 pounds.

Carbon Dioxide water jacketed incubator - $1,275

List: $5,500. MedCon: VG. Double chamber water jacketed C02 incubator.

Features:

adjustable height stainless steel shelves
inner glass door, outer thermal door, heated
adjustable temperature
temperature gauge, for each chamber

In this incubator, water from the water jacket provides humidity, and carbon dioxide provides a medium for certain bacterial growth. Dual chambers allow two batches to be run at different times under different conditions.

Shipping weight is about 350 pounds.

Table top water jacketed CO2 incubator - $975

List: $4,200. MedCon: VG. Table top carbon dioxide incubator, Napco model 5100.

Features:

analog gauge, 0-15% CO2 display
gauge, 25-55 deg C temperature display
heat on/off
CO2 on/off
gas sample port
outer and inner door
adjustable stainless steel shelves

Overall dimensions:

length: 22"
width: 24"
height: 39"

Interior dimensions:

length: 18
width: 18"
height: 25"

Shipping weight is about 175 pounds.

Digital CO2 incubator, bench top - $2,000

List: $6,300. MedCon: EX. Scientific Products model Ultra-tech carbon dioxide incubator, model WJ301 sada.

Features:

digital temperature control
digital carbon dioxide atmosphere control
heated door with adjustable heating
adjustable shelves

The temperature control module features:

digital temperature display, reads to 0.1 deg C
chamber temp indicator light
set chamber control temp
set over temp
audio silence/ reset button
heat on indicator light
power fail indicator light
over tempo indicator light
adds water indicator light

The CO2 carbon dioxide control module features:

digital CO2 concentration display, reads to 0.1% CO2
set CO2 %
set zero point
audio silence
CO2 injection indicator
both low and high CO2 warning lights

Overall dimensions:

length: 25"
width: 29
height: 33

Interior dimensions:

length: 24
width: 19
height: 20"

Shipping weight is about 325 pounds.

Double chamber incubator, CO2 water jacketed - $1,750

List: $4,700. MedCon: EX. Napco water jacketed incubator.

Features:

2 chambers
analog display and control of temperature for each chamber
analog display of carbon dioxide atmosphere for each chamber
CO2 sample port
heated doors
interior glass doors

Dimensions, interior:

length: 19"
width: 18"
height: 26.5"

Dimensions, exterior:

length: 24"
width: 24"
height: 72.5"

Shipping weight is about 350 pounds.

Table top incubator - $975

List: $3,200. MedCon: Inc. In excellent condition except outer door removed. Fischer model 550 D. 0-80 Deg C temperature range. Adjustable height shelves.

Shipping weight is about 200 pounds.

Double chamber incubator, CO2 water jacketed - $2,300

List: $4,700. MedCon: EX. Precision scientific water jacketed incubator.

Features:

2 chambers
digital display and control of temperature
digital display and control of carbon dioxide atmosphere
CO2 sample port
heated doors
interior glass doors

Indicator lights for:

power on
water jacket low
alarm muted
calibrate mode
temp high
main heat
door heat
temp low
CO2 high
CO2 on
CO2 low
tank empty

Dimensions, interior:

length: 18"
width: 19"
height: 27"

Dimensions, exterior:

length: 23"
width: 23"
height: 77"

Shipping weight is about 350 pounds.

Incubator - $1,275

List: $5,375. MedCon: Ex. Forma scientific model 3890 incubator. Heating is by a bank of high intensity fluorescent lights, as shown.

Features:

adjustable height shelve
will hold up to 10 trays at a time
may be vented externally

Interior dimensions:

length:
width:
height:

Exterior dimensions:

length:
width:
height:

Shipping weight is about 300 pounds.

Incubator, CO2 water jacketed - $2,350

List: $6,100. MedCon: EX. Fisher Scientific model 610 dual chamber water jacketed CO2 incubator.

Features:

digital individual chamber controls
high temperature alarm light
low water indicator light
digital readout and control of temperature and CO2 %
adjustable temperature range
adjustable C02 atmosphere
interior glass door
interior adjustable height stainless steel shelves

Interior working dimensions:

length: 18"
width: 16
height: 25"

Exterior dimensions:

length: 23"
width: 24"
height: 72"

Shipping weight is about 350 pounds.

Single chamber table top C02 incubator - $900

List: $2,700. MedCon: G. Carbon dioxide incubator, made by lab line instruments, model # 417. Features:

overload protection
on/off switch
adjustable temperature setting
air flow control, with regulator and flow rate indicator
carbon dioxide low control, with regulator and flow rate indicator
carbon dioxide quick injector, 0-60 second timer

Inside working dimensions:

width: 19"
height: 26"
depth: 20"

Outside overall dimensions:

width: 20.5"
height: 39.5"
depth: 21"

Shipping weight is about 200 pounds.

Single chamber tabletop CO2 water jacketed incubator - $1,275

List: $3,400. MedCon: G. Lunaire Bio model 665G water jacketed, CO2 incubator.

Features:

digitally controlled C02 concentration, in %
adjustable temperature, -20 to 37 Deg C
thermometer, -20 to 60 deg C
built in alarm
add water indicator light
power on indicator light
CO2 sample port
adjustable stainless steel shelves
interior door is glass
exterior door is metal, heated

Inside working dimensions:

width: 20"
height: 26"
depth: 20"

Outside overall dimensions:

width: 26"
height: 42"
depth: 26"

Shipping weight is about 375 pounds.

Double chamber CO2 water jacketed incubator - $ 1,375

List: $5,400. MedCon: VG. Nation appliance model 3331-3 dual chamber incubator with dual controls. Carbon dioxide atmosphere, water jacketed for humidity.

Features:

each side has independent controls for gases
temperature control is the same for both chambers
dual exterior doors
dual interior glass doors
0-6 minute timer for rapid gas injection
water level gauge
air flow gauge
Carbon dioxide flow gauge
on / off switch
heat cycle indicator light
0-10 rheostat
adjustable height stainless steel shelves

Inside working dimensions:

width: 19"
height: 23"
depth: 17"

Outside overall dimensions:

width: 46"
height: 36"
depth: 24"

Shipping weight is about 400 pounds.

Dual chamber drying oven - $700

List: $2,600. MedCon: VG. Precision scientific model 6m.

Features:

adjustable range
high/low temperature switch
adjustable height shelves
inner glass doors
outer metal doors

Inside working dimensions:

width: 18"
height: 26"
depth: 18"

Outside overall dimensions:

width: 46"
height: 36"
depth: 23"

Shipping weight is about 400 pounds.

Shaking incubator - $1,750

List: $6,200. MedCon: G. Has cracked cover glass, still usable. Labline shaking incubator, model 3525. Motor driven shaker platform, inside of a heated chamber.

power on/off
0-60 second timer
temperature control, with regulator
speed control, with meter showing speed
temperature gauge, reading -10 to 110 deg C
Wired for 120 VAC, 50/60 Hz

Inside working dimensions:

width: 34"
height: 15"
depth: 22"

Outside overall dimensions:

width: 44"
height: 33.5"
depth: 24.5"

Shipping weight is about 325 pounds.

Single chamber C02 water jacketed incubator - $1,325

List: $4,350. MedCon: EX. Shell Labs model 1810 single chamber carbon dioxide water jacketed incubator.

Features:

digital temperature control, accurate to 0.1 deg Celsius
heated door
digitally controlled carbon dioxide concentration, accurate to 0.1 % CO2
water level warning light
on / off switch
heat cycle indicator light
5 adjustable height stainless steel shelves

Inside working dimensions:

width: 18"
height: 25"
depth: 17.5"

Outside overall dimensions:

width: 23"
height: 36"
depth: 25"

Shipping weight is about 250 pounds pounds.

Water jacketed incubator - $1,600

List: $3,900. MedCon: G. Forma scientific model 3158, new August 1991. C02 water jacketed incubator.

Features:

power on/off switch
ambient -60 deg C adjustable temperature,
switch setting for dedicated 37 deg C temperature
gas regulator, with sample port. Usually used for C02 may be used for other non-explosive gases
digital CO2 controlled atmosphere
temperature monitor and alarm module
heated door

Inside working dimensions:

width: 18.5"
height: 26"
depth: 18"

Outside overall dimensions:

width: 24"
height: 42"
depth: 23.5"

Shipping weight is about 275 pounds.

Low temperature incubator - $1,475

List: $4,700. MedCon: VG. Low temperature incubator, Curtis Matheson Scientific model 213.

Features:

upper and lower temperature range controls
digital temperature display
digital temperature control, -10 to 50 degrees C range
dial setting

Inside dimensions:

length: 22"
width: 28"
height: 53"

Outside dimensions

length: 27"
width: 32"
height: 72"

Shipping weight is about 275 pounds.

Blood culture incubator - $3,750

List: $23,600. MedCon: G. Bactec model NR-730 automatic blood culture reader. Made by Becton - Dickinson.

Features:

measures bacterial growth by infrared spectroscopy
average 45 seconds per vial
processes up to 30 vials at a time, without radioactive media
automatic vial top decontamination and needle set rotation
built in printer and sample ID computer
includes operator's manual, and vial set trays

Shipping weight is about 175 pounds.

Circulating incubator / dryer - $175

List: $370. MedCon: VG. About 22" square. with racks that hold samples above either a drainage area or a pool of water. Unit has a fan that circulates and warms air inside the unit.

Lab heater blocks - $75 each

List: $285. MedCon: G. In ugly but usable condition. Laboratory tube block heaters. With space for thermometer.

2 units pictured in stock.

Heater block - $75

List: $180. MedCon: G. Thermajust heater block, holds 30 tubes (5 x 6 pattern). For test tube culture work. Adjustable temperature.

Temperature block - $75

List: $200. MedCon: G. Scientific products heater block for test tubes, with a block that holds 20 tubes, also has a hole for insertion of a thermometer.

Programmable oven - $475

List: $2,900. MedCon: P. In excellent condition except display reads an error code. Baxter model DN-43 constant temperature oven.

Features:

digitally controlled temperature
heat set / measure display
3 covered access ports
programmable controller, will let user ramp up temperature, hold it, and ramp down per programmed cycle time
2 interior adjustable height stainless steel shelves
door has both view glass and positive locking latch
Interior dimensions: 18" w x 20" d x 24" h
shipping weight is about 150 pounds

Bench top incubator - $850

List: $1,600. MedCon: G. National Appliance model 3221 C02 water jacketed incubator.

Features:

temperature regulation
temperature safety
temperature gauge
adjustable shelves, includes 3 not shown in photos
water indicator
air flow indicator, liters per minute
C02 flow indicator, liters per minute
timer, 0 to 5 minutes

Water jacketed CO2 incubator - $975

List: $3,200. MedCon: G. Forma Scientific model 3157 water jacketed incubator.

Features:

temperature setting fixed 37°C / variable
temperature control, in °C
temperature safety
analog temperature gauge, in °C
add water light
heated door, with adjustable door heat

The unit has forma's CH/P CO2control. This features:

CO2 system light
CO2 alarm light
alarm: silence/normal/defeat
sample inlet
digital display of both CO2set point and actual, in % CO2

Interior dimensions are:

18.5" wide
18" deep
24" high

Exterior dimensions are:

25" wide
24" deep
44" high

Incubator control - $75

List: $390. MedCon: G.

Temperature control for a incubator, rheostat type, fused for 15 amps.

© Copyright 1993- 2008 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482