Production Engineering - Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Laboratory centrifuges and accessories

Swinging bucket rotor, blood banking - $1,975

List: $5,490. MedCon: G. Sorvall HG-4L swinging bucket rotor with four buckets.

This unit is sized to hold 4 liter sized blood bags.

Shipping weight is about 50 pounds.

Blood centrifuge - $375

List: $960. MedCon: VG. Composite Rotor, Inc. Kompspin K PC-4 (manufactured by Hettich). 100-127 V, 50-60 Hz.

Features:

• fixed angle carbon fiber composite E1824 rotor holds two tubes in inner well and can be capped to reduce aerosols
• adjustable time (up to 99 min) and rotor speed (to 4,500 rpm) with LED displays
• start, stop and lid release buttons
• active cycle indicator
• power on/off rocker switch on back of centrifuge

Overall dimensions of the unit:

• width: 8.5 in.
• depth: 13
• height: 8.5

Shipping weight is about 15 pounds.

Tabletop centrifuge - $1,675

List: $5,625. MedCon: VG. Beckman GP centrifuge. 120 V, 60 Hz.

Features:

• GH37 rotor with 4 buckets (750 ml) included, rated at 3,750 rpm
• speeds up to 8000 rpm with other rotors
• 30 minute timer plus hold position
• high, low or off braking functions
• power on/off and door release buttons

Overall dimensions of the unit:

• width: 21.5 in.
• depth: 26.5
• height: 14.5

Shipping weight is about 200 pounds.

Sorvall centrifuge rotor - $175

List: $400. MedCon: VG.

Sorvall type HL-4 centrifuge rotor with 4 two-place no. 627 trunnions and 8 tube shields (ID = 1.25 in.)

Shipping weight is about 10 pounds.

IEC centrifuge rotors - priced as shown

MedCon: IEC centrifuge rotors, all rated MedCon G

	IEC 845A 8-place fixed angle rotor tube positions are 2 in. ID x 5 deep 8 sleeves included 1.75 in. ID x 5 Shipping weight is about 25 pounds.	$975
	IEC 816 open body style rotor Includes eight No. 305 shields Shipping weight is about 10pounds.	$475
	IEC 236 rotor Includes 2 Aerocarriers with inserts for 7 tubes Shipping weight is about 5 pounds.	$375
	IEC 215 4-place swinging bucket rotor Shipping weight is about 5 pounds.	$200
	IEC 284 rotor. Includes 4 No. 384 cups, 2.5 in. ID and 4 No. 7222 inserts, 1 in. ID Shipping weight is about 15 pounds	$675

Shipping weight is about 25 pounds each.

Cytocentrifuge - $2,475

List: $14,900. MedCon: EX. Shandon Cytospin 3 centrifuge. 110 V, 60 Hz.

Features:

• 12-place rotor
• 21-slide support inserts included
• speed may be set up to 2000 rpm
• time may be set up to 99 min in 1 min intervals
• speed and time parameters may be saved as programs

Overall dimensions of the unit:

• width: 15.5 in.
• depth: 19.5
• height: 9

Shipping weight is about 80 pounds.

Cytocentrifuge - $1,375

List: $6,300. MedCon: VG. Shandon Cytospin 2, a 12 place cytology centrifuge. Wired for 110 V, 60 Hz.

Features:

• programmable spend time
• programmable speed, to within 10 rpm
• speed indicator light
• start and stop buttons
• see-through Plexiglas cover

Overall dimensions of the unit:

• width: 15.25 in.
• depth: 19.5
• height: 8.75

Shipping weight is about 60 pounds. 2 units in stock.

Centrifuge rotor - $1,375

List: $3,900. MedCon: VG. IEC model 947 rotor. This is a 14 in. diameter shell with a built-in swinging bucket rotor with four catalog no. 383 cups and four catalog no. 2740 inserts ( 10 tube, 0.5 in.).

An extra set of 383 cups with catalog no. 989 inserts (7 tubes, 11/16 in. or 17 mm) is included.

Shipping weight is about 40 pounds.

Blood bank centrifuge - $875 each

List: $1,325. MedCon: VG. Baxter Immunofuge II bench top centrifuge. 110-120 V, 60 Hz.

These units are different from the cell washing centrifuge use with built in pumps, although they look similar in appearance, and have similar brand names. With these units, the operator adds and he can still washing buffers solution manually, after each spin cycle.

Features:

• 12-place rotor holds 10-12 x 75 mm tubes and each tube sleeve has a spring clip for easy decanting
• two speeds -- 3075 to 3375 and 2200 to 2800 rpm, depending on loading
• touch pad entry of time
• LED display of time
• on/off rocker switch
• spring-loaded lid

Overall dimensions of the unit:

• width: 9.5 in.
• depth: 12.5
• height: 8.5

Shipping weight is about 25 pounds each. 3 units in stock.

Bench top centrifuge - $ 1,475 each

List: $6,700. MedCon: VG. Rupp & Bowman Silencer S-103 NA centrifuge. 115 V, 60 Hz.

Features:

• speeds to 6,000 rpm, 3,500 rpm with included rotor
• timer to 30 minutes, plus hold
• control panel has brake on/off switch, start button with indicator lamp, tachometer, timer, and speed selection dial
• clear-view lid
• swinging bucket rotor has inserts for 2 ea. 24 tube (1/2 in.) holder and 2 ea. 16 tube (5/8 in.) holder

Overall dimensions of the unit:

• width: 17.75 in.
• depth: 17.75
• height: 17.5

Shipping weight is about 120 pounds. Two units in stock.

Centrifuge inserts - $275 takes all

Two sets, brand-new in the box centrifuge inserts as shown.

Thermo IEC catalog number 072310F, two pair total of Ultrack adapter, 1 x 50 milliliter

Shipping weight is about 10 pounds.

Clinical centrifuge - $1,475

List: $8,900. MedCon: G. Beckman Spinchron DLX centrifuge. 120 V, 60 Hz. This unit is working but seems to be temperamental in terms of giving error messages.

Features:

• brush less induction drive
• 4-place PTS-2000 rotor (3250 rpm) is shown below with sector holders for analyzer sample tubes; rotor also takes microtiter plates
• speeds up to 6400 rpm with other rotors
• digital display window shows speed, time and acc/dec rate
• programmable memory
• timer to 30 min. and hold position
• pulse button for quick runs
• imbalance detector
• door interlock

Overall dimensions of the unit:

• width: 21.5 in.
• depth: 27.5
• height: 16.25

Shipping weight is about 160 pounds.

Tabletop centrifuge, 8 place - $675

List: $1,875. MedCon: VG. Becton Dickinson/Clay Adams Dynac II centrifuge 120 V, 60 Hz.

Features:

• 8 place rotor with six no. 0901 shields
• variable speed dial
• analog speed gauge
• run/brake toggle switch
• 1-30 min. timer with hold position

Overall dimensions of the unit:

• width: 14 in.
• depth: 18.5
• height: 12.25

Shipping weight is about 45 pounds.

Micro-capillary centrifuge - $475

List: $1,625. MedCon: VG. IEC model MB micro capillary centrifuge, 115 V, 50/60 Hz. Includes catalog no. 905 rotor which has eight places each for wide and narrow tubes, 16 places total.

Overall dimensions of the unit:

• width: 10 in.
• depth: 10
• height: 9

Shipping weight is about 30 pounds.

Ultracentrifuge - $1,475

List: $72,375. MedCon: F. Beckman L2-65B ultracentrifuge. 220 V.

Offered for parts or refurbishing. Electrical system checks out; we have not tested for high speed operation with a rotor. Diffusion oil is drained. One side panel is missing.

Features:

• rated for G rotors
• power switch with indicator lamps
• vacuum pump and diffusion pump switches with analog vacuum gauge
• refrigeration on/off switch with indicator lamp, temperature set and limit dials and analog temperature gauge
• timer dial to 300 min plus hold
• rotor speed set dial with analog speed gauge
• brake on/off toggle switch
• rotor revolution counter

Overall dimensions of the unit:

• width: 37 in.
• depth: 29
• height: 45

Shipping weight is about 700 pounds.

Tabletop centrifuge with rotor - $1,375

List: $5,475. MedCon: G. Beckman model TJ-6 tabletop centrifuge. 120 V, 60 Hz.

Features:

• TH-4 rotor with four octagonal buckets with inserts holding 18 tubes of 12 ml volume ea, rated 2,700 rpm
• TH04 rotor rated at 2,700rpm with this combination.
• speeds to 6000 rpm; tested at 2900 rpm with TH-4 rotor
• 0-30 min timer with hold position
• adjustable braking
• lid lock knob
• power on/off switch with indicator lamp
• centrifuge has side ports which can be interfaced with a Beckman refrigeration unit
• tachometer port

Overall dimensions of the unit:

• width: 19 in.
• depth: 24
• height: 14.5

Shipping weight is about 190 pounds.

Tabletop centrifuge with rotor - $1,975

List: $12,699. MedCon: G. Hermle Z383 or Z382 tabletop centrifuge. 120 V, 50/60 Hz. Enamel on top of centrifuge is chipped, but centrifuge is in good operational condition.

Automatically detects rotor, and then limits maximum speed to that rated for each individual rotor type.

Features:

• maximum speed of 17,000, tested out at 4,500 rpm with large rotor.
• the included rotor buckets have inserts for holding 20 tubes
• accepts a variety of fixed angle and swing-out rotors
• speed and time set dials and program sets by touch pad
• digital display of time, rotor speed and g value
• stainless steel chamber
• heavy duty lid lock with lid open/closed indicator
• tachometer port

Overall dimensions of the unit:

• width: 19 in.
• depth: 24
• height: 15

Shipping weight is about 200 pounds.

Tabletop centrifuge with rotor - $1,375

List: $4,930. MedCon: G. IEC Centra-7 tabletop centrifuge. 115 V, 60 Hz.

Features:

• 4-place 210 rotor arm with swinging buckets (500 ml)
• speeds to 6000 rpm; tested at 2900 rpm with the 210 rotor
• 0-50 min. timer with hold position
• adjustable braking
• power on/off switch with indicator lamp
• run and stop buttons
• tachometer port

Overall dimensions of the unit:

• width: 23 in.
• depth: 23
• height: 16

Shipping weight is about 180 pounds.

Rotors for swinging buckets - $475 each

List: $1,000-$1,910. MedCon: VG.

	6-position IEC 259 rotor arm, 14.5 in. diam.
	4-position IEC 216 rotor arm, 13 in. diam.
	4-position IEC 276 rotor arm, 14 in. diam.
	4-position rotor arm, black,13.5 in. diam., no manufacturer's mark or model no.

Shipping weight is about 30 pounds each

Refrigerated centrifuge - $3,750

List: $14,252. MedCon: VG. IEC DPR-6000 refrigerated centrifuge. 200-260 V, 60 Hz.

Features:

• speeds to 6000 rpm with appropriate rotors
• includes IEC 418 rotor (rated at 3200 rpm) with twin 72 tube (1/2 in. diam.) carriers for RIA
• large refrigerated chamber (22.75 in .diam.) can also accommodate 6 x 1 L blood bag rotor
• speed set dial and digital display
• refrigeration set dial and analog gauge reads -10 degrees to +30 degrees C
• timer can be setup to 105 min or hold position
• variable braking
• main power circuit breakers and start/stop, over cover buttons
• rotor stopped indicator light

Overall dimensions of the unit:

• width: 27.5 in.
• depth: 35.5
• height: 47

Shipping weight is about 400 pounds.

Refrigerated high speed centrifuge - $3,275

List: $19,225. MedCon: VG. Beckman J2-21 centrifuge. 208 V, 60 Hz. Can be used with an elutriation-capable rotor such as the JCF-Z to produce large core pellets.

Features:

• equipped with elutriation hardware and tubing
• 14 in. diameter rotor chamber accommodates J rotors
• door interlock
• imbalance detection
• timer to 160 min. plus hold
• rotor speeds to 21,000 rpm
• temperature range of -30 to +50

Includes elutriation controller.

Overall dimensions of the unit:

• width: 28 in.
• depth: 34.5
• height: 51

Shipping weight is about 700 pounds.

Micro centrifuge - $750

List: $5,220. MedCon: VG. Beckman Microfuge 12, catalog no. 343122. 120 V, 60 Hz.

Features:

• 6 racks with 8 holes each to hold 1.5 ml microfuge tubes
• variable speed dial, off and 1-12
• timer can be set 0-15 min.
• start switch
• power on lamp

Overall dimensions of the unit:

• width: 9.5 in.
• depth: 14.25
• height: 12.5

Shipping weight is about 35 pounds.

Cell-washing centrifuge - $2,375

List: $12,340. MedCon: VG. Baxter/Dade automatic centrifuge II (DAC II). 110/120 V, 60 Hz.

Features:

• for washing and re suspending cells and immuno hematology procedures
• 12-place rotor with metal shields accepts 10 or 12 mm. dia. tubes
• saline pump adds buffered solutions to tubes and decants fluid during centrifugation
• operator can program wash, spin and agitate times
• digital display of operation step and rotor speed
• drain in back

Overall dimensions of the unit:

• width: 12.5 in.
• depth: 16
• height: 15

Shipping weight is about 60 pounds.

Urinanalysis cytocentrifuge - $375

List: $819. MedCon: VG. Davstar Cen-Slide 60.

Features:

• closed system for centrifuging sediment in urine sample into a viewing area in Cen-Slide tubes for examination on a microscope stage
• 6-place rotor
• optimized centrifugation parameters for consistent operation
• no need for pipetting sample out of tube or use of glass slides
• 4 suction cups provide stable base
• operates on 24 VAC transformer from 120 V, 60 Hz. power.

Overall dimensions of the unit:

• width: 12 in.
• depth: 13
• height: 6

Shipping weight is about 20 pounds.

Refrigerated tabletop centrifuge - $2,875

List: $7,825. MedCon: VG. Refrigerated table top centrifuge, model IEC Centra-8R centrifuge. Wired for 100/120 V, 50/60 Hz.

Features:

• includes 8-place fixed-angle 845 rotor for use with 100 ml tubes in rubber adapters, as shown
• start button
• brake button
• refrigeration temperature set dial to 0 degrees C
• time set dial to 59 min plus hold button
• speeds to 5800 rpm, depending on rotor
• stop/open buttons

Overall dimensions of the unit:

• width: 23 in.
• depth: 30.5
• height: 17.5

Shipping weight is about 200 pounds.

Refrigerated tabletop centrifuge - $1,375

List: $6,825. MedCon: VG. Beckman model TJ-6 centrifuge with TJ-R refrigeration unit. 120 V, 60 Hz. Working unit offered without rotor.

Features:

• adjustable speed, 0-6000 rpm
• safety interlock
• high/low brake
• 0-30 minute timer, with hold
• on/off switch, start button
• rpm display gauge

Overall dimensions of the side by side unit:

• width: 33 in.
• depth: 24
• height: 15

Shipping weight is about 200 pounds.

Floor centrifuge with 2 rotors - $975

List: $4,900. MedCon: F. IEC universal model UV floor centrifuge with 2 complete rotors. 115 V, 60 Hz. This is a working unit. The top and front of the unit have inconsequential rust damage. The side panels and rotor chamber are rust-free. The speed gauge is not working put there is a tachometer port that can be used for calibration.

Its old, its ugly, and it works great.

Features:

• speeds up to 6000 rpm
• timed (to 2 hr) and not timed modes
• 8-place 240 rotor with trunnions and shields for 50 ml tubes
• 6-place 221 rotor with trunnions and shields for 15 ml tubes
• storage space in cabinet
• extra trunnions and shields included

240 rotor	control panel	storage compartment	221 rotor

Overall dimensions of the unit:

• width: 23.5 in.
• depth: 29.5
• height: 37.5

Shipping weight is about 300 pounds.

Refrigerated centrifuge - $5,750

List: $17,375. MedCon: VG. Sorvall Instruments Omnispin R floor model. 220 V, 50/60 Hz.

Features:

• microprocessor controller with integrated computer and program memory
• H4211 4-place swinging bucket rotor
• operating temperature range of -10 to 40 degrees C
• slow start and stop
• multiple programmable braking rates
• automatic malfunction indicators
• maximum operating speed is 3600 rpm
• maximum capacity is 4 x 500 ml
• instruction manual included

Overall dimensions of the unit:

• width: 26 in.
• depth: 29
• height: 41

Shipping weight is about 400 pounds.

High-speed centrifuge - $4,750

List: $24,890. MedCon: G. Beckman LS-50 refrigerated ultracentrifuge. Wired for 220 VAC, single phase.

Features

• maximum speed of 50,000 rpm
• refrigeration limit of -5 degrees C
• vacuum and diffusion pumps
• timer: 0-300 minutes and hold
• setable acceleration

Overall dimensions of the unit:

• width: 37.5"
• depth: 32
• height: 52

Shipping weight is about 900 pounds.

Beckman rack rotor - $1,275

List: $3,425. MedCon: VG.

Beckman JR 3.2 rack rotor. Maximum speed is 3,200rpm. Four place-rotor is 13.5 in. diameter and racks are 4.5 x 10.5 in.

Shipping weight is about 50 pounds.

Refrigerated tabletop centrifuge - $2,475

List: $8,760. MedCon: G. Eppendorf model 5402. 115 V, 50/60 Hz. Door must be pressed firmly to catch latch. No other operational problems.

Features:

• 18-place rotor holds 1.5 ml polypropylene tubes
• touch pad arrows and digital display for setting temperature, speed and time
• centrifugation speeds of up to 14,000 rpm
• fast-cooling mode

Overall dimensions of the unit:

• width: 24 in.
• depth: 19
• height: 12

Shipping weight is about 150 pounds.

Sorvall centrifuge rotors and accessories

	MedCon: F. HB-1594 rotor with with four internal hanging buckets (#09010)	$975
	MedCon: G. HL-4 rotor with four internal hanging buckets (#38002, 250 ml capacity) and four 7-place tube inserts.	$2,275
	MedCon: VG. HL-8 rotor. Sold as set with following accessories (see photo): 3 ea. swinging rack holder (#598) 1 ea. two-place tube rack 2 ea. three-place tube racks 4 ea. five-place tube racks 4 ea. twelve-place tube racks 3 ea. twenty-place tube racks 1 ea. forty-place tube rack. A second HL-8 rotor (MedCon: G) is available without the accessories, $750	$1,275
	MedCon: VG. H1000B rotor arm with set of four rectangular buckets (PN 00833)	$975
	MedCon: F. SS-34 fixed angle rotor. No cover.	$275
	MedCon: G. Sorvall KSB "Szent-Giorgi & Blum" continuous flow system for use with SS-34 rotor. Also called an elutriation system. Performs centrifugal separations on a continuous flow of fluid for production use. All components appear to be present.	$1,750

IEC centrifuge rotors and accessories

	MedCon: G. model 221 six-place rotor with fixed trunnions. Sold as a set with six #302 and six # 356 shields.	$375
	MedCon: G. model 240 eight-place rotor arm. Accepts tube shields used with trunnion rings.	$275
	MedCon: G. model 253 twelve-place rotor arm. Accepts tube shields used with trunnion rings.	$275
	MedCon: G. Trunnion rings and shields for use with either of the above rotor arms. Photo shows representative examples: complete set consists of: thirteen 4-place rings (#354) sixteen 3-place rings (#355) sixty-eight shields (#302, 15 ml) twenty-five shields (#356, 7 ml) nineteen large rings (#325) fourteen shields (#320, 50 ml) two each 5-place shields (#369) and ring (#366) seven 8-place metal tube carrier, oblong block shape (#381) assortment of cushion pads	$475
	MedCon: VG. model 809 fixed angle (45 degrees) 12-place rotor and set of twelve #302 shields (15ml).	$275
	MedCon: EX. 24-place hematocrit rotor (#927)	$225
	MedCon: VG. model 870 closed rotor, 8-place fixed angle, rated to 19,000 rpm. 2 in stock	$425
	MedCon: F. model 870, no lid	$375
	MedCon G. open fixed-angle rotor model 850 with six buckets which can hold 250 ml bottles. Included are: one set of six red plastic bucket inserts holding 7 tubes (cat # 7224) three black plastic inserts holding 3 large and 3 small tubes (cat # 7234) three short plastic inserts holding 10 tubes (cat # 7228)	$975

Beckman centrifuge rotors and accessories

	MedCon: G. high-speed JA-14 rotor for Avanti J and J2 centrifuges. Six-position, fixed angle (25 degrees). Holds 250 ml bottles or so ml tubes (with adaptor).	$1,475 each
	MedCon: VG. Beckman 4-arm rotor with set of four large buckets. As shown in the photo the buckets can accommodate plastic tube adaptors of various configurations. Rotor is rated to 4,500 rpm.	$1,850

Tabletop centrifuge - $875

List: $2,800. MedCon: EX. Clay Adams Dynac model 420101 centrifuge. 120 V, 60 Hz.

Features:

• 24-place rotor with tube shields (0.75 x 4 in.)
• speed control dial
• timer to 30 min. plus hold

Overall dimensions of the unit:

• width: 19 in.
• depth: 15
• height: 11

Shipping weight is about 30 pounds.

Zetafuge - $875

List: $1,900. MedCon: VG. Coulter Electronics Zetafuge model CZ. 115 V, 60 Hz. Six-place vertical rotor for holding small-diameter tubes. For use in studies of RBC aggregation and Zeta sedimentation rates.

Overall dimensions of the unit:

• width: 6 in.
• depth: 6.5
• height: 9

Shipping weight is about 15 pounds.

Blood bank centrifuge/cell washer - $1,375

List: $3,400. MedCon: VG. Laboteck/Immucor Diacent 2M. 110-115 V, 60 Hz.

Features:

• twelve-place rotor with plastic tube holders
• pump and tubing system for adding saline to tubes
• drain in back
• LED message window
• Program Mode for operator to enter specifics for washing steps

Overall dimensions of the unit:

• width: 10 in.
• depth: 12.5
• height: 13

Shipping weight is about 55 pounds.

Beckman centrifuge rotor - $1,175

List: $4,825. MedCon: G. Beckman wind shielded 4-arm rotor with no model designation. Diameter is approximately 14.5 in. Designed to hold swinging buckets of approximately 500 ml capacity.

Shipping weight is about 55 pounds.

MSE centrifuge rotor - $1,275

List: $4,419. MedCon: VG. MSE wind shielded rotor model 43124-708 with four 750 ml buckets. Diameter is approximately 17.5 in.

Shipping weight is about 50 pounds.

Sorvall centrifuge rotor - $1,875

List: $5,265. MedCon: VG. Sorvall HG-4L rotor.

Shipping weight is about 55 pounds.

Beckman centrifuge rotor - $1,825

List: $6,288. MedCon: G. Beckman JS-4.2 wind shielded rotor. Diameter is approximately 21.5 in. With five 1 liter buckets for a six-place rotor. Can be used to centrifuge blood bags or 1 liter bottles. With appropriate adapter can be used to centrifuge microtiter plates.

Shipping weight is about 50 pounds.

Tabletop refrigerated centrifuge - $2,750

List: $ MedCon: VG. Sorvall Model T6000, with rotor.

Features:

• h2000B 4-place swinging bucket rotor rated at 3600 rpm.
• rotor supplied with 4 buckets (No. 11053) with 2 ea. tube adapters of 20 and 48 slots.
• rotor is adaptable for larger tubes and bottles.
• speeds to 6000 rpm with other rotors.
• tinted see-through easy-lift door to rotor compartment.

Shipping weight is approximately 250 pounds.

Beckman centrifuge rotor, swinging tube holder - $4,500

List: $11,565. MedCon: G.

Beckman model SW27 swinging bucket rotor with tube holder.

Has six inserts in rack, as shown.

Shipping weight is about 35 pounds.

Beckman centrifuge rotor, fixed angle - $3,275

List: $9,200. MedCon: VG. Beckman type 50 10-place fixed-angle centrifuge rotor.

Unit is rated to a maximum speed of 50,000 rpm.

Shipping weight is about 50 pounds.

Sorvall centrifuge rotor, fixed angle - $1,275

List: $6,322. MedCon: VG.

Type SS-34 8-place fixed-angle rotor, with screw-on cover.

Shipping weight is about 35 pounds.

Sorvall centrifuge rotor, fixed angle - $875

List: $6,322. MedCon: F. Sorvall type SS-34 8-place fixed-angle rotor with screw-on cover.

Unit has some surface pitting as shown.

Shipping weight is about 35 pounds.

Sorvall centrifuge rotor, vertical elutriation - $2,750

List: $9,275. MedCon: EX. Sorvall model TV850 vertical rotor, with eight chambers.

Each chamber has a screw on cap with three access holes. Produces a three gradient product, with in there, middle and outermost density zones.

Rotor may be sampled through syringes (obviously when unit is stopped) or with an elutriation set up while rotor is moving.

Shipping weight is about 50 pounds.

Sorvall centrifuge rotor, zonal - $4275

List: $8,200. MedCon: VG. Sorvall model TZ-28 zonal rotor, 1,350 ml capacity. Rotor is divided into six zones as shown in photo.

Includes a precision fitting screw on lid with spanner wrench.

Shipping weight is about 45 pounds.

Sorvall fixed angle rotor - $3,275

List: $4,235. MedCon: G. Sorvall model SPX fixed-angle rotor. with screw on, close fitting lid.

Unit holds five small tubes and 10 larger tubes.

Shipping weight is about 40 pounds.

Sorvall fixed angle rotor - $3,275

List: $4,235. MedCon: G. Sorvall type M fixed-angle rotor. with screw on, close fitting lid.

Unit holds 24 tubes.

Shipping weight is about 40 pounds.

Sorvall centrifuge rotor, fixed angle - $1,750

List: $4,625. MedCon: G. Sorvall fixed angle centrifuge rotor, type M

Unit is rated to a maximum speed of 20,000 rpm.

Shipping weight is about 50 pounds.

Sorvall centrifuge rotor, fixed angle - $1,750

List: $4,800. MedCon: G. Sorvall type GSA fixed angle centrifuge rotor.

Unit is rated to a maximum speed of 20,000 rpm.

Shipping weight is about 50 pounds.

Sorvall centrifuge rotor, ultracentrifuge six place - $4,650

List: $14,200. MedCon: VG. Sorvall model A641 fixed-angle ultra centrifuge rotor. 6-place, for 100 ml tubes,

With screw cap as shown.

Shipping weight is about 55 pounds.

Sorvall centrifuge rotor, ultracentrifuge 8 place - $4,750

List: $14,892. MedCon: VG. Sorvall model T865 fixed-angle rotor for ultracentrifuge. 8-place, for 36ml tubes.

With screw cap as shown.

Shipping weight is about 55 pounds.

Sorvall centrifuge rotor, ultracentrifuge, six place - $4,325

MedCon: VG. Sorvall model AH650 swinging bucket rotor, 6-place, for 5 ml tubes.

With rack for six inserts, as shown.

Shipping weight and is about 40 pounds.

24 place Micro hematocrit centrifuge - $475

List: $1800. MedCon: ex. Lourdes Vernitron 24 place Micro hematocrit centrifuge.

Shipping weight is about 35 lbs.

Ultra centrifuge - $975

List: $5,280. MedCon: G. Older model of an ultra centrifuge, high speed, good to 50,000 rpm. Unit new in about 1978, has about seven years of use on, then sat unused in a hospital's warehouse.

Features:

• 0-300 minute timer, hold position
• refrigerated
• tachometer, in rpm, 0-50 thousand rpm
• odometer showing rotor revolutions in thousands, current reading is 83,686
• built in vacuum pump
• with brake
• unit is in clean condition despite age, as shown below

Shipping weight is about 600 lbs.

Small centrifuges, priced as shown

1.	Drucker hematocrit, 24 place, $375
3.	Abbot TDX, 24 place, $375
5.	6 place, $175
6.	Micro hematocrit, $325
7.	12 place, $250

Shipping weight for each is about 25 pounds.

Floor mounted refrigerated centrifuge with multi purpose rotor - $4,750

List: $19,100. MedCon: ex. Beckman floor mounted refrigerated centrifuge, model J-6, with six place multi-purpose rotor.

Features:

• rotor has six swinging buckets with three styles of inserts, as shown
• rotor is covered, with air guard
• adjustable speed, 0-6000 rpm
• rpm meter shows rotor speed
• power on-off switch
• power indicator light
• imbalance indicator light
• adjustable time
• adjustable brake
• start/stop switch
• refrigeration display with set point, good to -20° C
• temperature control accurate to within 0.1 degrees C
• over temperature warning light
• motor brush replacement indicator light

Shipping weight is about 600 lbs.

Floor model refrigerated centrifuge, induction drive - $5,750

List: $22,300. MedCon: ex. Beckman floor model refrigerated centrifuge with four place rotor, model J-6M.

Features:

• full digital controls, with microprocessor
• except for line of Beckman full-size rotors
• induction drive motor, for maintenance free long-term use without changing motor brushes
• on castors
• wired for 208/220 VAC, 60 hertz
• 10 programmable acceleration and deceleration rates
• 10 program memories
• selectable rotors, with built-in preprogrammed maximum speed limits
• digital display of rotor speed, time, rotor, acceleration curve and deceleration curve
• speed indicator accurate to +/- 10 rpm
• temperature controls accurate to 0.1° C

Overall dimensions:

• length: 33 in.
• width: 28 in.
• height: 50 in.

Shipping weight is about 700 lbs.

Centrifuge - $875

Clay Adams Dynac II centrifuge. Features:

• 0 - 30 minute timer, with hold
• 0 - 4,000 rpm gauge
• adjustable speed, minimum to maximum
• ob/off switch
• clear plastic safety cover
• brake switch
• swinging bucket rotor, holds 4 buckets of 7 tubes each, 28 tubes total

Shipping weight is about 35 pounds.

Table top centrifuge - $1,275

List: $3,200. MedCon: G. IEC Centra model 8 table top centrifuge.

Features:

• 4 place rotor with covered, swinging buckets
• includes bucket inserts to hold 16 tubes per bucket
• start button
• brake button
• time/hold button
• stop/open
• selectable time and rpm

Shipping weight is about 150 pounds. wired for 120 VAC, 50/60 Hz.

Floor centrifuge - $750

List: $3,200. MedCon: G. Drucker model 804 company floor centrifuge.

Features:

• 0-6,000 rpm
• extended coast / coast / brake stopping modes
• 0-120 minute timer
• rotor spinning indicator light
• imbalance indicator light

Shipping weight is about 250 pounds.

High speed centrifuge - $1,750

List: $18,700. MedCon: G. High speed centrifuge model LS-50 by Beckman. Features:

• 50,000 maximum speed
• refrigerated to -20 degrees C
• set up with "elutriation" option, also it does not have matching rotor
• built in vacuum diffusion pump, good to about 1 micron of pressure
• timer, 0-240 minutes, or hold

Shipping weight is about 900 pounds.

High speed centrifuge - $2,750

List: $15,400. MedCon: VG. Beckman model LS3-50 ultra centrifuge. This is a very high speed centrifuge. To get the samples up to very high speed, unit does 2 things:

• refrigerates the chamber, so samples do not overheat
• subjects chamber to a vacuum with built in vacuum pump to reduce air resistance for rotor rotation.

System is good to 50,000 rpm!

Shipping weight is about 1,000 pounds.

Automatic refrigerated centrifuge - $1,275

List: $8,900. MedCon: G. Sorvall superspeed centrifuge, model RC2-B.

Features:

• up to 20,000 rpm
• refrigerated
• timer, 0-2 hours, or hold
• adjustable temperature setting
• adjustable speed setting
• various indicator lights
• accommodates dupont and Sorvall style: rotors with taper (see photo detail)

Shipping weight is about 400 pounds.

Table top centrifuge - $175

List: $3,400. MedCon: P. Non-working parts unit. MSE Mistral model 100 table top centrifuge.

Features all digital controls: speed, timer, and braking.

Wired for 120 AC 50/60 Hz.

Shipping weight is about 75 pounds.

Refrigerated centrifuge - $2,300

List: $8,400. MedCon: VG. Portable refrigerated lab centrifuge, model Varifuge RF, by Baxter Scientific products. Made by Heraeus Sepatech, Germany. Small, semi-portable laboratory centrifuge. Features:

• start, stop and open switches
• power on/off
• 0-30 minutes timer, or hold continuous
• adjustable speed, 0-1,200 rpm or 0-6,000 rpm
• adjustable brake intensity (0-10)
• micro brake adjustment
• adjustable temperature range, -30 to +40 degrees C
• speed gauge

Dimensions:

• width - 3 feet
• depth - 2.5 feet
• height - 2.5 feet

Unit has covers that may be easily removed, as shown in the following photo, which also shows pull strings for safety interlock override.

Wired for 120 VAC 50/60 Hz.

2 units in stock, 1 unit is without rotor and is priced at $1,500. Shipping weight is about 200 pounds each.

High speed centrifuge - $4,250

List: $18,700. MedCon: VG. Sorvall Dupont high speed refrigerated centrifuge, model RC-5 superspeed refrigerated centrifuge, with larger capacity 6 place rotor.

Features:

• self-contained refrigeration
• locking safety cover
• temperature gauge, latest 20 to us 40 degrees C, with adjustable set point
• adjustable speed, 0-25,000 rpm
• on-off button
• brake button
• power on off switch (needs minor repair)
• brushes indicator light
• refrigeration on indicator light
• door open indicator light
• forged high speed centrifuge rotor

Wired for 208 VAC 60 Hz. Shipping weight is about 350 pounds.

Immunifuge 2 centrifuge - $750 each

List: $1,370. MedCon: EX. Immunifuge 2 serological centrifuge, by Dade. Rotor holds up to 12 blood collection tubes. Features:

• 12 place rotor
• digital controlled timer
• stop/ start button
• high./low speed select button
• manual operated safety latch

This is a modern unit with digital controls.

Shipping weight is about 20 pounds each. Wired for 110/120 VAC 60 Hz.

3 units in stock.

Table top centrifuge - $1,075

List: $1,900. MedCon: EX. Clay-Adams serifuge model 2001. About 2 years old as of this writing. This is a current model from clay Adams.

Features:

• holds blood tubes in rotor
• electric safety latch for cover
• digitally controlled timer
• digitally controlled RPM

This unit will create a good impression in any laboratory.

Wired for 110 VAC, 60 Hz.

Refrigerated centrifuge - $1,750

List: $6,200. MedCon: G. IEC model PR-6000 refrigerated centrifuge. Features:

• adjustable speed, 0-6,000 rpm
• adjustable temperature, -10 to +20 degrees centigrade
• adjustable brake, with on/off switch and automatic setting
• timer (0-105 minutes, hold)
• on / off switch
• start/ stop switch
• rotor stopped indicator light
• with 12 place swing arm centrifuge (only with 2 buckets)
• indicator light for brush replacement
• wired for 208/240 VAC 60 Hz

Shipping weight is about 400 pounds. On castors.

High speed centrifuge - $4,500

List: $16,800. MedCon: G. Beckman model J-21B floor mount refrigerated centrifuge. Features:

• very high speed (up to 25,000 rpm) operation
• adjustable speed (0-22,000 rpm)
• power on/off switch
• brake switch on/off
• timer (0-180 minutes, hold)
• adjustable temperature (40 to -10 degrees)
• wired for 208/240 VAC 60 Hz

Shipping weight is about 350 pounds. On castors.

Floor mount centrifuge - $1,475

List: $7,300. MedCon: VG. Damon-IEC model CU-5000 / CRU-5000 floor mount centrifuge. Features:

• 24 place swing-arm rotor (12 buckets of 2 tubes each)
• on castors
• safety interlocked rotor chamber cover
• wired for 115 VAC 60 Hz
• on/off switch
• 0-105 minute timer, or continuous hold
• 0-6,000 rpm
• 2 speed electrical brake
• rotor stopped indicator light
• replace brushed indicator light
• stop/open cover indicator light

Shipping weight is about 250 pounds. 1 unit is a CR-5000, 3 units are CRU-5000.

Refrigerated centrifuge - $800

List: $3,300. MedCon: G. IEC model PR-6 floor model refrigerated centrifuge. Features:

• refrigerated operation
• coast
• hold
• timer
• brake
• off
• temperature to -20 deg C
• normal usage is at 3,000 rpm

Shipping weight is about 350 pounds

Centrifuge - $425

List: $1,350. MedCon: Ex. 12 place rotor for blood analysis. Clay Adams serifuge 2.

Covered rotor, timer, on/off switch.

Table top centrifuge - $425

List: $1,300. MedCon: VG. IEC model HN-S. This unit has a 6 place included. Features:

• covered table top rotor
• speed meter
• adjustable speed
• on/off switch
• brake button
• timer

Floor mounted centrifuge - $575

List: $1,300. MedCon: G. IEC model CS floor mounted centrifuge. This package includes:

• centrifuge, with timer
• brake
• 8 place rotor
• 3 tube buckets (holds 24 tubes total)
• 1 large tube bucket (holds 8 tubes total)
• 8 place buckets (holds 64 tubes total)
• tachometer (0-6,000 rpm)
• adjustable speed (0- full speed)

Table top centrifuge - $200

List: $2,700. MedCon: P. Beckman TJ-6 table top centrifuge. Unit is complete with motor. Cover latch is broken, unit is inoperative. This is a biomedical repairman's special.

Table top centrifuge - $1,700

List: $3,700. MedCon: VG. Dupont/ Sorvall T6000 table top centrifuge.

Features:

• 0-6,000 rpm, adjustable
• locking top
• power on/off
• fan cooled compact high speed motor
• with electric brake on/off
• shipped with a 4 place swinging bucket type rotor. Each bucket holds 20 test tubes.

Dimensions:

• 12" high
• 32" wide
• 24" deep
• Shipping weight is about 170 pounds

Floor mounted centrifuge - $1,150 each

List: $3,200. MedCon: VG. IEC model "size 2K" floor mounted centrifuge.

Features:

• 24 place swinging bucket rotor
• 2 machines have 6 place buckets, 6 x 24=144 tube capacity
• 1 machine has 4 place buckets, 4 x 24=98 tube capacity
• speed to 6,000 rpm
• timer
• brake
• on castors
• shipping weight is about 300 pounds each

Centrifuge rotor - $550

List: $1,375. MedCon: Ex.

By Beckman, module number GH 3.7, rated at 3,750 RPM.

4 buckets, swinging rotor, with an insert that holds 19 tubes.

Microhematocrit centrifuge - $375 each

List: $2,100, MedCon: Ex. Microhematocrit centrifuge, with 24 place capillary tube style rotor. For spinning down blood for quick hematocrit test.

By IEC, 0-15 minute timer, with brake, 4 units in stock. Also 1 of older style, $325.

Centrifuge, 6 place - $125

List: $250. MedCon: G. By Drucker and others.

Holds 6 test tubes, uncovered.

Other centrifuges

• IEC PR-6, floor mount refrigerated to 7,000 RPM - $975

• IEC PR-6 refrigerated centrifuge, MedCon F, 0-8,000 rpm, 0-15 minute timer, 0-1230 minute timer, drive hold, coast, brake and refrigeration selector switch. On castors.
  
  
  
  
• Jouan GR-4.11 digitally controlled, refrigerated, floor mount centrifuge - $2,000

• MedCon: G. Floor mount refrigerated centrifuge, IEC model PR-J. 0-6000 rpm, 0-120 minutes, coast/brake switch, with a #269 8 place rotor (no buckets). Wired for 110 VAC. $475

Sorvall Centrifuge rotors

• MedCon: EX. HS-4, with 4 swinging buckets, 7 tube holder and cover - $675
• MedCon: EX. HS-4, with 4 square swinging buckets, 24 tube holder and cover - $675
• Sorvall HL-8 rotor. 8 place open swing bucket configuration with 6 dual tube (1" diameter, model 359) buckets and 2 2- place tube holders, dupont PN 00575. - $750
• MedCon: EX. HG-4l, new unit, 4 place high speed swing bucket covered rotor, with 4 tube inserts - $800
• MedCon: G. Round, 4 place rotor, with cover, tapered mount, 4 single tube swing holders with single tube insert - $350

Other IEC Centrifuge rotors

• MedCon: G, older style open bucket rotor arm, 8 place, # 269 -$125 each
• Sets of older style chromed, single, dual and quad tube swinging holders - $15 each, set of 6
• MedCon: VG, closed rotor, # 872, rated to 14,500 rpm, 6 large place covered fixed angle - $500
• MedCon: VG, closed rotor, # 873, rated to 20,000 rpm, 12 place covered fixed angle - $475

© Copyright 1993- 2008 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482