PEMED - Production Engineering Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Some new arrivals as of 1/22/2012

Items inventoried before 12/12/11 have been moved to their respective categories.

Dialysis unit - $1,975

List: $47,800. MedCon: VG. Cobe/Hospal Prisma CFM dialysis machine. 85-135/180-260 V, 50/60 Hz.

Features:

• status lights for standby (yellow), run (green) and fault (red)
• 4 peristaltic pump system -- blood, dialysate, effluent and replacement pumps
• LED touch screen for message display, setup and customization
• pressure sensors and air and leak detectors
• 2 hooks for fluid bags
• tubing diagram
• remote connector on back
• 8.5 foot power cord with hospital grade plug
• unit has 31,973 hours of use

Overall dimensions of the unit:

• 25 x 25 in. rolling base with 5 casters (3 locking)
• height: 57.5

Shipping weight is about 125 pounds.

Contrast media injector - $2,675

List: $12,390. MedCon: VG. Medrad mark IV 4 radiology contrast media injector, on stand with controller as shown. 105-120 V, 60 Hz.

Used to inject contrast media during fluoroscopy, angiography, x-ray and CT procedures.

Features:

injector head with adjustable tilt and swivel

• selectable linear rise, seconds
• flow rate, ml
• flow forward/reverse toggle
• selectable injection pressure limit, 150-1200 psi
• syringe holder accepts 65 and 130 ml sizes; one heated sleeve
• armed/inject indicator light
• injection progress graphical indicator
• back of console has J12 (film changer trigger), J11 (injector head), and J13 (auxiliary start switch input) connectors
• vinyl storage cover
• 11.5 foot power cord with hospital grade Hubbell plug
• Mark IV Operation Manual included

Overall dimensions of the unit:

• width: 34 in.
• depth: 28
• height: 55

Shipping weight is about 150 pounds.

Head/neck surgery bed - $2,475 each

List: $12,800. MedCon: G. Stryker 966 head/neck surgery bed. Good operational condition but some cracking of plastic molding.

Features:

• bed height adjusts from 26 to 35 inches (plus 2.5 inch pad)
• 24 x 83 x 2.5 inch pad with tapered head support
• attachment port for head brace
• aluminum support frame beneath pad (some scratching)
• brake set and hydraulic pedals all at foot end of bed
• Trendelenberg and reverse Trendelenberg positions
• slide down side rails
• bumpers at foot end and around castor mounts
• adjustable tilt back support
• three sets of brackets for restraint straps

Overall dimensions of the unit:

• width: 87.5 in.
• depth: 30
• height: 28.5

Shipping weight is about 275 pounds. 2 units in stock.

Patient stretcher - $2,375 each

List: $8,890. MedCon: VG. Steris Hausted Horizon Series multi-purpose stretcher.

Features:

• height adjustable from 22.5 to 34.5 inches
• pad included
• slide down side rails (partial and full up positions)
• brake/release can be set at at any of the 4 wheels
• foot board with patient chart holder
• adjustable tilt back support
• knee crank
• restraint strap
• bumpers on four sides
• bottom storage bin
• hydraulic pedals on both right and left sides

Overall dimensions of the unit:

• width: 85 in.
• depth: 29
• height: 25

Shipping weight is about 250 pounds.

Radiology phantoms - $175 each

MedCon: VG. A variety of radiation phantoms from Nuclear Associates and perhaps other manufacturers.

1.		Nuclear Associates model 37-701-5 depth dose phantom 3 and 4 ports drilled into top and bottom faces dimensions: 9&13/16 x 3&13/16 x 9&13/16 inches shipping weight: 20 pounds
2.		Nuclear Associates model 73-301 or 78-301 rectangular field jumbo flood phantom filled, fill ports dimensions: 23 x 18 x 31/32 inches shipping weight: 20 pounds
3.		circular field flood phantom 17 inch diameter field, unfilled, fill ports dimensions: 18&1/8 x 18&1/8 x 15/16 inches shipping weight: 8 pounds
4.		circular field flood phantom 15 inch diameter field, unfilled, fill ports dimensions: 16.5 x 16.5 x 1 inches shipping weight: 6 pounds
5.		circular field flood phantom 13&3/8 inch diameter field, unfilled, fill ports dimensions: 15&5/8 x 15&5/8 x 1 inches shipping weight: 5 pounds
6.		rectangular field phantom filled, fill ports dimensions: 19.5 x 14 x 29/32 inches shipping weight: 7 pounds
7.		rectangular field phantom unfilled, fill ports dimensions: 19.5 x 14 x 29/32 inches shipping weight: 6 pounds

Shipping weight is about 15 pounds each.

Ureteroscope and biopsy forceps - $675

List: $3,900. MedCon: VG. Wolf 4712.401 rigid ureteroscope and Wolf 7317.60 biopsy forceps.

Features:

• 3 x 430 mm scope has combi bridge with instrument guide and two fluid ports
• biopsy forceps have a 35 inch flexible shaft
• instrument case (bottom only) included

Shipping weight is about 3 pounds.

Cystoscope with biopsy forceps - $1,975

List:$8,300. MedCon: VG. Circon ACMI ACN-1 cystoscope with two biopsy tools.

Features:

• flexible scope with 5.5 x 370 mm shaft
• adjustable focus eyepiece
• connector for fiber optic cable
• instrument guide
• RF-558 and GF-558 biopsy tools
• case

Overall dimensions of the case:

• width: 20.25 in.
• depth: 10
• height: 2.75

Shipping weight is about 5 pounds.

Ureteroscope - $2,375

List: $8,900. MedCon: VG. Circon ACMI AUR-7 flexible ureteropyeloscope.

Features:

• scope has 2.5 x 256 mm shaft
• fiber optic cable included
• carrying case with foam insert

Overall dimensions of the case:

• width: 25.75 in.
• depth: 17.5
• height: 5.5

Shipping weight is about 15 pounds.

Ureteroscope - $1,975

List: $9,200. MedCon: VG. Circon ACMI MRO-2005 ureteroscope.

Features:

• 5 x 215 mm shaft
• eyepiece with adjustable focus
• two stopcocks
• fiber optic cable included

Shipping weight is about 1 pound.

Nephroscope - $1,475

List: $8,200. MedCon: VG. Storz 28020A Hopkins 0° nephroscope with attachable instrument guide and biopsy forceps.

Features:

• scope has one stopcock, the distal part beyond the 90° bend is approximately 3.5 x 40 mm
• Storz 28020G biopsy forceps
• Storz 28020J instrument guide

Shipping weight is about 1 pound.

Arthroscope - $975

List: $4,822. MedCon: VG. Stryker 343-30 endoscope.

Features:

• 2.5 x 148 mm shaft
• 30° viewing angle
• storage case

Overall dimensions of the case:

• width: 11.5 in.
• depth: 3
• height: 2.5

Shipping weight is about 1 pound.

Surgical fastener kit - $875

List: $3,520. MedCon: VG. Acufex Isotac kit, 012581. Surgical fastener kit for attaching suture to bone in procedures such as cruciate reconstruction.

contents:

• small, medium and large guides
• isometric positioner
• isotac driver
• case

Overall dimensions of the case:

• width: 11.5 in.
• depth: 7.25
• height: 1.5

Shipping weight is about 2 pounds.

Radiation protection shield - $1,875 each

List: $8,300. MedCon: VG. Mavig Hanel leaded glass shield, model 1257001.

Features:

• leaded glass shield pulls up from four to 32.5 inches above frame
• 27.5 inches wide, 12 mm thick ( equivalent to 0.5 mm lead)
• transport handles on right and left sides
• rolls on four castors

Overall dimensions of the unit:

• width: 34 in.
• depth: 20
• height: 45.5

Shipping weight is about 140 pounds. 2 units in stock (1 needs new castors, which we will replace before shipment)

Endoscopy tower - $475

List: $3,600. MedCon: VG. Medi-Mech model 1000-1 endoscopy tower with monitor.

Features:

• rolling unit on 5 castors
• front of unit has two compartments with drop-down locking doors
  • two shelves in top compartment
  • shelf and drawer in bottom compartment
• two locking doors on back side for access to back of instruments
• right and left side transport handles
• cord wrap
• Sun Microsystems model GDM-20E20 18 inch diagonal monitor, 100-240 V, 50-60 Hz.
  • see above photo showing control panel features
  • monitor takes universal power cord and has a 10-pin connector for signal input
  • monitor is mounted on a swivel pedestal (270°) with tilt cradle

Overall dimensions of the unit:

• base: 31 x 31 in.
• height: 54 (74 with monitor)

Shipping weight is about 200 pounds.

Electro hydraulic lithotripter - $475

List: $2,800. MedCon: VG. Circon ACMI AEH-3 (Rev. A) electro hydraulic lithotripter. 120 V, 60 Hz.

Features:

• output level slider switch
• timer pushbutton, continuous or 0.05, 0.20 or 0.50 seconds
• connectors for hard and soft probes, accepts four electrode sizes, 9, 5, 3, and 1.9 fr
• output active indicator light
• Circon FS-3 pneumatic foot pedal
• power on/off rocker switch
• universal power cord

Overall dimensions of the unit:

• width: 17 in.
• depth: 11
• height: 5

Shipping weight is about 45 pounds.

Ultrasonic lithotripter - $475

List: $3,300. MedCon: VG. Circon ACMI USL-2000 ultrasonic lithotripter. 115/230 V, 60/50 Hz.

Features:

• transducer and footswitch connectors on front of instrument (transducer and footswitch not included)
• pulse, preset and linear modes with reset
• increase/decrease touchpad arrows for setting pulse rate and amplitude, with accompanying % bar graphs
• fault indicator light (probe not connected)
• power on/off rocker switch with green indicator light
• universal power cord

Overall dimensions of the unit:

• width: 15 in.
• depth: 12
• height: 4.5

Shipping weight is about 20 pounds.

Image acquisition unit - $750

List: 5,200. MedCon: VG. Kodak Ektascan ImageLink System image acquisition unit. 100/120 V, 60 Hz.; 220/240 V, 50 Hz.

Features:

• 3 x 4 inch monitor
• Setup and diagnostic menus
• 105 MB data transport cartridge
• I/O panel on back of the unit
• eight-foot universal power cord with hospital grade plug

Overall dimensions of the unit:

• width: 12.25 in.
• depth: 17.75
• height: 9.5

Shipping weight is about 45 pounds.

Fiber-optic light source - $675

List: $3,200. MedCon: VG. Smith & Nephew Images xenon XL fiber optic light source, model 7205353. 120 V, 50/60 Hz.

Features:

• light port with connectors for Wolf/Dyonics, Storz, Olympus and ACMI
• bulb change door
• coaxial video in connector on back
• power on/off rocker switch with green indicator light
• circuit breaker on back
• universal power cord
• shown with fiber optic cable, not included

Overall dimensions of the unit:

• width: 17.25 in.
• depth: 18.25
• height: 4.5

Shipping weight is about 20 pounds. 2 units in stock.

CO2 Insufflator - $875

List: $2,960. MedCon: VG. Olympus 15L Surgical CO2 insufflator. 100-240 V, 50/60 Hz.

Features:

• flow start/stop button
• flow adjust dial, to maximum of 15 L/min
• pressure adjust dial, to maximum of 25 mm Hg
• volume reset button
• gas supply bar graph
• alarm light
• CO2 gas inlet on back
• CO2 connecting cable included
• universal power cord
• power on/off rocker switch with green indicator light

Overall dimensions of the unit:

• width: 13.25 in.
• depth: 12.5
• height: 7

Shipping weight is about 20 pounds.

Laser inspection scope - $475

List: $2,200. MedCon: VG. Coherent VersaPulse inspection scope.

Features:

• selector position toggle for 0°, 15° and 30° probes or all others
• SMA coupler
• fiber tightening screw

Overall dimensions of the case:

• width: 10 in.
• depth: 6.5
• height: 2

Shipping weight is about 2 pounds.

Dielectric sealer - $750

List: $2,300. MedCon: VG. Fenwal Hematron model H-1 dielectric TUBE sealer. 115 V, 50/60 Hz.

Features:

• power on/off toggle (back of unit)
• thermostat adjusts (back of unit)
• carrying handle

Overall dimensions of the unit:

• width: 12.5 in.
• depth: 11
• height: 10.25

Shipping weight is about 25 pounds.

Transport stretcher chair - $2,375

List: $9,802. MedCon: VG. Hausted ASC-275 chair.

Features:

• 20 inch wide seat
• seat height adjuster from 26 to 34 inches
• adjustable headrest
• brake set levers on front casters
• brake release levers on back castors
• hydraulic lift/down on right and left sides
• short rail for attaching equipment
• hooks for waist- level restraint strap

Overall dimensions of the unit:

• width: 25.5 in.
• depth: 42
• height: 56.5

Shipping weight is about 160 pounds.

Programmable dental porcelain furnace - $1,275

List: $4,375. MedCon: VG. Dentsply Multimat 99 porcelain oven. 115 V, 60 Hz.

Features:

• 99 preprogrammed firing cycles
• adjustable temperature climb
• stationary firing platform
• digital display of program, time, vacuum set and actual temperatures
• night standby mode
• status indicator lights; AC connected, pump on, thermocouple, and muffle
• temperature calibration program
• °F /°C toggle
• back of unit as calibration jack, vacuum hose, vacuum pump AC outlet
• furnace is to be used with vacuum pump which can be purchased separately

Overall dimensions of the unit:

• width: 12.75 in.
• depth: 16.25
• height: 18.25

Shipping weight is about 70 pounds.

Dental lathes - priced as shown

List: $1,100 each. MedCon: G. Grinder and polishing lathes from Handler, Emesco and Nobilium. We have several variations of the Handler Red-Wing model 26 . These are pictured individually so that the buyer may examine the shaft style and accessories. The Red-Wing design has two front and one rear screw slots for table mounting. The blue Emesco also has this design. The second Emesco and the Nobilium are weighted for use without table fastening. All units are wired for 115 V, 60 Hz. and have power cords with grounded plugs. All units are two speed as indicated below.

1.		Handler Red-Wing model 26A 1/6 and 1/4 hp, 1725/3450 rpm	$150
2.		Handler Red-Wing model 26A 2 units in stock with this shaft	$150
3.		Handler Red-Wing model 26A	$150
4.		Handler Red-Wing model 26A grinding wheel included	$150
5.		Handler Red-Wing model 26A eye shield and light bulb quick release chuck hi speed multiplier, appear to be 10:1	$750
6.		Handler Red-Wing model 26A eye shield and light bulb	$300
8.		Emesco model 42 1/3 hp, 1725/3450 rpm	$200
9.		Emesco model 41 1/6 hp, 1725/3450 rpm	$200
10.		Nobilium hi-speed grinder, model 4 10,000 and 24,000 rpm eye shield and lamp with two bulbs	$475

Shipping weight is about 45 pounds for each of these models except the Nobilium, which is about 35 pounds.

Dental vacuum form machine - $375

List: $800. MedCon: VG. Nite White vacuum forming unit. 120 V, 60 Hz.

Features:

• vacuum and heat on/off toggle switches
• perforated rack with hinged lid
• 7-foot power cord with grounded plug

Overall dimensions of the unit:

• width: 9.75 in.
• depth: 9.5
• height: 13.25

Shipping weight is about 15 pounds.

Visible light spectrophotometer - $750

List: $2,400. MedCon: VG. Turner model 340 spectrophotometer. 100-240 V, 50/60 Hz.

Features:

• cuvette chamber with hinged lid
• digital display to three decimal places of absorbance
• transmittance/absorbance toggle with indicator light for active selection
• dial-in wavelength set, range, 420-890 nm
• zero and 100% adjust
• back of unit has analog output jacks, -/+, 0-1 VDC
• universal power cord

Overall dimensions of the unit:

• width: 15.25 in.
• depth: 11.75
• height: 5.25

Shipping weight is about 15 pounds.

Rotary microtome - $2,500 each

List: $8,700. MedCon: VG. Sakura Accu-Cut SRM 200 CW microtome (model 1429, non retracting).

Features:

• universal blade holder base with lateral displacement, allowing use of full length of blade
• universal cassette clamp
• smooth action hand wheel
• 100 mm blade
• 0-60 um sectioning range, 0-10 um, adjustable by 1 um, 10-20 um, adjustable by 2 um, and 20-60 um, adjustable by 5 um
• visible display of micron setting
• 10 or 50 um trimming steps
• compatible with steel knives and Accu-Edge disposable blades
• vinyl storage cover

Overall dimensions of the unit:

• width: 15.75 in.
• depth: 18.75
• height: 14.5

Shipping weight is about 65 pounds. 2 units in stock.

Microtome - $2,475

List: $3,900. MedCon: VG. Leica 2020 microtome.

Features:

• 100 mm blade, rated as good but not excellent condition
• anti-roll bar

Overall dimensions of the unit:

• width: 9.5 in.
• depth: 12.5
• height: 8

Shipping weight is about 35 pounds.

Microtome - $1,475

List: $3,200. MedCon: VG. Ames model 4551 Microtome.

Features:

Overall dimensions of the unit:

• width: 9.5 in.
• depth: 7
• height: 5.5

Shipping weight is about 25 pounds.

Microtome blade and holder - $750

MedCon: VG. Reichert-Jung blade holder assembly with blade and anti-roll bar. 160 mm blade operating in a 70 mm cutting window on the holder.

Shipping weight is about 2 pounds.

Microtome blade - $475

MedCon: VG. Hacker Instruments microtome blade, 170 mm with case.

Overall dimensions of the case:

• width: 8.25 in.
• depth: 1.75
• height: 2.25

Shipping weight is about 1 pounds.

Microtome blade holder - $275

List: $633. MedCon: VG. Microtome blade holder, appears to be American Optical part.

Overall dimensions:

• width: 5.5 in.
• depth: 3.5
• height: 4.75

Shipping weight is about 2 pounds.

Tissue flotation bath - $875

List: $2,300. MedCon: VG. Triangle Biomedical Sciences (TBS) model FWS-120 flotation workstation. 100-120 V, 50/60 Hz.

Features:

• 9 x 9 inch bath chamber
• chamber molding has cutouts on right and left sides for easy access to capture floating sections on slides
• small warming plates on top of console
• front light illuminates bath

Overall dimensions of the unit:

• width: 11.5 in.
• depth: 17.75
• height: 7

Shipping weight is about 10 pounds.

Circulating water bath - $975

List: $1,640. MedCon: VG. Braun Thermomix 1460 circulating bath. 120 V, 60 Hz. Some flaking of enamel due to rusting

Features:

• 11 liter capacity
• temperature set dial to -50 to +200°C
• stainless steel bath pan with lid
• thermometer port
• circulating hose connectors on back of unit
• 9 foot power cord with grounded plug

Overall dimensions of the unit:

• width: 13 in.
• depth: 14.25
• height: 14

Shipping weight is about 35 pounds.

Water bath - $425 each

List: $1,120. MedCon: VG. Fisher model 133 Versa-bath. 115 V, 60 Hz.

Features:

• 6 x 11.75 x 5 inch chamber
• heat and safety thermostat dials with yellow and red indicator lights
• heated to maximum temperature of 92°C in our tests
• gabled lid with thermometer port
• diffusion plate
• 5.5 foot power cord with grounded plug

Overall dimensions of the unit:

• width: 9 in.
• depth: 17.25
• height: 10.75 (with lid)

Shipping weight is about 20 pounds. 2 units in stock.

Agitating water bath - $975

List: $3,200. MedCon: G. Blue M MagniWhirl model MW-1110A-1 agitating water bath. 120 V, 60 Hz.

Features:

• chamber dimensions above rack are 12 x 7.5 x 5 inches
• agitator paddle with adjustable frequency and cycle light
• temperature range, 5° above ambient to 100°C
• gabled lid with thermometer port
• drain spigot in back

Overall dimensions of the unit:

• width: 10 in.
• depth: 21
• height: 17

Shipping weight is about 50 pounds.

Film processing hand dip tanks - $375

List: $950. MedCon: N. For dirt simple simple darkroom development of films.

Features:

• stainless steel bath chamber (19.5 x 17 x 23 inches) on steel stand with two cassette holding tanks (4 x 14.75 x 20 inches)
• fills from bottom (plumbed inlet included) and drains from top

Overall dimensions of the unit:

• width: 20.25 in.
• depth: 21.75 (including inlet pipe)
• height: 36

Shipping weight is about 60 pounds.

Micro hematocrit centrifuge / digital reader - $800

List: $1,780. MedCon: VG. Iris CritSpin micro hematocrit centrifuge and digital reader

Features:

• Iris CritSpin micro-hematocrit centrifuge (model M961-22) with RH12 rotor
• Iris model S120-22 digital reader
• model AD-740U1240 power supply, 100-240 V, 50-60 Hz. input, 24VDC output
• instruction manual

Overall dimensions of the centrifuge:

• width: 6.75 in.
• depth: 8.75
• height: six

Shipping weight is about 10 pounds.

Heating block - $225

List:$750. MedCon: VG. Sterrad controlled-temperature incubator, model 21005. 100-120 V, 50/60 Hz.

Features:

• for culturing biological indicators for use with the Sterrad 50 sterilizer
• three rows of six slots each
• thermometer port (for short thermometer)
• calibration port (set screw) on back of units with
• 6- foot, 9- inch power cord with grounded plug

Overall dimensions of the unit:

• width: 7.75 in.
• depth: 6
• height: 9

Shipping weight is about 4 pounds.

Slide label printer - $275

List: $600. MedCon: N. Ventana EbarII slide label printer. 24VDC power source operating from100-240 V, 50-60 Hz.

Overall dimensions of the printer:

• width: 8.25 in.
• depth: 12.5
• height: 7.5

Overall dimensions of the shipping box:

• width: 20.25 in.
• depth: 12.25
• height: 12.5

Shipping weight is about 30 pounds.

Video camera controller - $750

List: $4,800. MedCon: VG. Olympus OTV-SX2 camera control unit. 120 V, 50/60 Hz.

Features:

• 26-pin camera connector
• adjustable brightness with bar graph display
• white balance
• R and B painting
• color bars
• back of unit has I/O panel with video in and out and specialized Olympus functions
• power on off rocker switch with green indicator light

Overall dimensions of the unit:

• width: 12 in.
• depth: 15
• height: 3.5

Shipping weight is about 8 pounds.

Fetal pulse oximeter - $375

List: $3,100. MedCon: VG. Nellcor N-400 pulse oximeter. 100-120 V, 50/60 Hz.

Features:

• displays %FSpO2 and heart rate
• pulse amplitude indicator
• signal quality indicator
• alarm and mute
• FSpO2-PM cable with 9-pin connector for sensor included
• information cards

Overall dimensions of the unit:

• width: 12.75 in.
• depth: 12.5
• height: 3.75

Shipping weight is about 10 pounds.

Fiber-optic light source, 300 w - $975

List: $4,800. MedCon: VG. Wolf model 5131 Auto LP fiber-optic light source. 100-127 V, 50/60 Hz.

Features:

300 W xenon lamp

• light port turret with connections for Wolf, Stryker, Olympus, and ACMI cables
• auto and manual aperture
• light intensity bar graph
• power on/off touch buttons
• back of the unit has video in and video out coaxial connections
• universal power cord

Overall dimensions of the unit:

• width: 13 in.
• depth: 14.75
• height: 6.25

Shipping weight is about 25 pounds.

Electrocardiograph - $475

List: $900. MedCon: VG. Burdick EK/5A electrocardiograph. 120 V, 60 Hz.

One of the classic units of the industry. As old as the hills, and as reliable.

Features:

• Burdick EK/5A console on rolling cart with storage compartment and transport handles
• CME cable with LL, LA, C, RA and RL leads
• frequency response toggle, med/high
• adjustable sensitivity
• dial for selecting leads mode
• chart speeds of 25 and 50 mm/sec
• power on/off toggle
• input, output and ground jacks
• ten rolls of 50 mm paper included
• Littmann model 205AA ECG trimmer included
• heart rate calculator included

Overall dimensions of the unit:

• width: 20.5 in.
• depth: 15.5
• height: 33.5

Shipping weight is about 40 pounds.

Audiometer - $750

List: $2,077. MedCon: VG. Maico MA39 audiometer. 117 V, 50-60 Hz.

Features:

• portable case with removable top
• needs headphones
• dials on the side of instrument control intensity (-10 to 110 dB) and frequency ( 125 to 8000 Hz)
• patient response button, red indicator light on panel
• stimulus button with red indicator light (test signal)
• operating instructions
• power on all rocker switch
• carrying handle
• 7.5 foot power cord with hospital grade plug

Overall dimensions of the unit:

• width: 13 in.
• depth: 15.75
• height: 6.5

Shipping weight is about 15 pounds.

© Copyright 1993 - 2012 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this web site, including derived information, may be republished without express written permission and payment of fees.

PEMED - Production Engineering Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482