Production Engineering - Medical Equipment Division

PEMED HOME 6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Pharmacy

Unit dose packaging machine sealer - $1,975

List: $6,230. MedCon: G. Euclid Medical Systems The Cadet (X-temp series) strip packaging machine. 115 V. Missing Plexiglas disc for pill feed, however we will make one for this unit before shipment. Does not have the stencil stamping attachment.

Features:

• seals pills between poly-foil and poly-cello
• processes 60 units/min., 1.5 x 2 in.
• 1 cycle and continuous run modes
• power on/off and heater on/off switches with indicator lights
• instruction manual
• supplies include 9 rolls each of poly-foil and poly-cello

Overall dimensions of the unit:

• width: 22 in.
• depth: 11
• height: 10

Shipping weight is about 70 pounds.

Screw capper and crimper - $3,750

List: $16,425. MedCon: EX. Cozzoli Machine Company model SC50T.115 V, 60 Hz. 1/6 HP GE motor. Provides uniform tightening of screw caps or crimping of aluminum seals. Supports closure sizes of up to 95mm and a production rate of up to 50 per minute by manual placement of containers.

Includes small air/vacuum pump as shown.

Overall dimensions of the unit:

• length: 18 in.
• width: 14
• height: 30

detail of rotary head
side view
back view
Welch/Thomas compressor model 2545B-01
manufacturer's plate

Shipping weight is about 130 pounds.

Tube sealer - $475

List: $1,925. MedCon: VG. Terumo tube sealer model ACS-152. Seals PVC and other plastic tubing of less than 6mm outside diameter using dielectric heating.

Overall dimensions of unit:

• length: 7 in.
• width: 12
• height: 6

Shipping weight is about 25 pounds.

Production tablet counter and verifier, large capacity - $7,500

List: $72,550. MedCon: ex. Large capacity, high speed automatic tablet sorter, as used in tablet and pharmaceutical manufacturing operations. Unit is a Veritab model 800, made by MOCON Modern Controls Inc.

Features:

• sorts and removes all tablets with weight defects
• range is 100-2000 mg
• does 100% tablet weight verification
• maximum speed of 800 tablets per minute
• determines statistical data for quality control systems (mean, standard deviation, trends, high totals, low totals, etc.)
• with onboard computer
• serial and parallel computer connections, for printer and remote terminals

Operational sequence:

• large pill hopper, holds about 2 ft.³ of material for sorting and weighing
• pill hopper empties into vibratory pan feeder
• vibratory pan feeder feeds tablets onto rotary sorting table
• rotary sorting table arranges tablets into single file sequence, and separates out tablets with gross errors
• rotor resorting table discharges through adjustable exit gates onto weighing mechanism
• weighing mechanism verifies weights of each tablet
• proper tablets are discharged through right side of this machine
• inferior tablets are rejected into waiting container

Other features:

• with video output for remote monitoring
• clean enclosure as shown, which is easily removable
• wired for 110 VAC, 50/60 hertz, may be used on international power frequencies
• on castors
• other information may be found at www.mocon.com

Unit may also be used to automatically count and verify small precision plastic or machine parts that are similar in form factor and size to tablet.

Shipping weight is about 400 lbs.

Packaging/sealing machine - $975

List: $2800. MedCon: VG. Doughboy tabletop or countertop package ceiling machine. For ceiling packages and pouches, containing either pills or sterile surgical instruments.

shipping weight and is about 75 lbs.

Tablet packager - $975

List: $5,600. MedCon: G. Pharma-Pak tablet packaging machine, model XL. Packages tablets in clear and opaque white tape.

With tray and wheel for small volume packaging. Unit handles a 2" web width. on stand as shown

Shipping weight is about 200 lbs.

Bag / pouch sealer - $675

List: $3,200. MedCon: EX. Impulse bag sealer, made by Rennco, model "lift seal". Seals bags up to 18" wide.

Unit will work with the following materials:

• Polyethylene bags
• Tyvek pouches
• paper pouches
• plastic pouches

Exterior dimensions:

• length: 10"
• width: 19"
• height: 7"

Shipping weight is about 50 pounds each. 2 units in stock

OmniCell Omnisupplier control module - $1,500

List: $45,600. MedCon: EX. Omnicell Omnisupplier control panel. This is a control module, the electronic guts of the system, for running a Omnicell optimized medication distribution system. May be used to dispense, control and automatically track supplies and medications in patient care areas. This unit is running V Jw4.1.1 software, 8/31/99, whatever that is. It is less than 1 year old, and appears new except has a crack in the plastic of the control panel.

For full information please see the manufacturers' web site, http://www.omnicell.com/product/index2.asp

Drug preparation cabinet - $1,275

List: $5,030. MedCon: G. Market Forge Drug preparation cabinet, model medi-prep. All stainless steel construction. Features:

• built in sink
• lap style locking drawer
• 3 shelf refrigerator
• under sinks service and storage area
• 4 shelf, stepped vial display area
• 2 adjustable height shelves
• locking 3 shelf compartment
• locking pull down, roll up overall cover.
• dimensions: 7' high, 2' deep, 4' wide.

Impulse bag sealer - $450

List: $1,340. MedCon: G. Floor model bag sealer. Sure tight sealer, made by Electroven manufacturing. A floor model impulse type sealer, with foot control. Simple but reliable. Sealing bar is about 12" wide.

Shipping weight is about 100 pounds.

Strapping / banding machine - $475

List: $1,9000. MedCon: G. Loop plus strapping machine, SPS medical Supply. This machine is used to package and band together materials with a plastic band, handles a stack with a cross section of about 16" square.

Features:

• automatic mode
• reset
• set minimum tension
• maximum tension
• increase lop size
• decrease loop size

The machine generates a loop, then materials are placed inside this loop, then machine tightens the loop around materials to band them together.

Shipping weight is about 55 pounds.

Liquid dispensers

• List: $5,513. MedCon: G. Beckman Accuprep system 221 dispensing system, dispenses 2 vials at a time. - $850
• List: $4,225. MedCon: F. Beckman Accuprep system 111, dispensing system. Dispenses liquid one vial at a time - $450

Narcotics control cabinet / dispenser - $1,800

List: $9,000. MedCon: EX. Documed narcotics control cabinet. Locking cabinet for controlled substance distribution. Holds 14 rows of 20 columns, each of different drugs. Also has 7 internal storage drawers and cabinets for additional locked storage. Operates with a series of keys and levers so that exact pill counts are dispensed. Records on a paper tape what is dispensed to whom.

© Copyright 1993 - 2008 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482