Production Engineering - Medical Equipment Division

PEMED HOME6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Laser imagers, cameras and film imagers

Digital radiology printer - $4,275

List: $22,350. MedCon: Demo. Agfa Drystar 3000 dry digital printer. Takes digital images from CT, fluoro, MRI, ultrasound and other medical imaging sources, and print them to paper. 100-120/220-240 V, 50/60 Hz.

Features:

uses 14 x 17 and 11 x 14 in. blue- and clear-based film to produce B&W hard copies
320 pixels/in. resolution, 12 bit contrast, and optical density range of 0.25 to > 3.00
image spooling to hard disk for high throughput
image storage in folders
display screen on control panel with navigation keys to respond to messages
keypad to acquire and print images and customize functions
I/O include two MFRI image (37-pin), two RS422 (15-pin), MAU [AUI, IOB2 and TP], service port and floppy disk drive
user manuals included

Overall dimensions of the unit:

width: 23.5 in.
depth: 22
height: 53

Shipping weight is about 320 pounds.

Dry imaging camera - $3,750

List: $18,900. MedCon: VG. Agfa Drystar 2000. 100-120, 220-240 V, 50-60 Hz. Network capable. this unit one takes the place of both a laser imager and wet film processor in an x-ray, fluoroscopy, MRI, ct, ultrasound or other radiology imaging source. prints to 8.5 x 11 paper. Removed from service 2/2005.

Communication ports:

floppy disk drive
TP
10B2
AUI
keypad
25-pin service

Accessories include:

Agfa Drystar 2000 reference manual, release 4.xx
Agfa software: Data Input over DICOM modality interface
Agfa system software back-up floppy disks
extra cassette with B/W film
Pritzel Electronic fiber optic link OPSP-8E with SPCI cable and SPDI ribbon cable
communication cable
fuses

	message window
	ports on back
	accessories

Overall dimensions of the unit:

width: 18 in.
depth: 27
height: 16.5

Shipping weight is about 175 pounds.

Phillips digital imaging camera - $1,475

List: $18,300. MedCon: EX. Phillips imaging camera, with remote printer control. In previous installation, connected to Phillips "Easyvision" imaging workstation. Imager handlers film sizes from 8 x 10" up to 14 x 17". Unit new in 1997.

Unit was professionally de-installed on July 1, 2005.

Includes a 14 x 17" send magazine, and a 14 x 17" receive film magazine.

Shipping weight is about 450 pounds.

Laser imager film cassettes - $275 each

List: $920. MedCon: ex. Kodak film magazines, fits 700 series Kodak loaders and laser imagers. Holds x-ray film for exposure by imager. Holds up to 14 x 17" film.

12 units in stock.

Shipping weight is about 25 pounds each.

Sterling diagnostics imaging network controller - $750 each

List: $4,500. MedCon: VG. Sterling diagnostic imaging links model NS 400 networking system. This is a network node, Dicom compatible, to connect to links and Kodak radiology imaging systems.

6 units in stock. Shipping weight is about 100 pounds each.

Radiology imaging laser camera - $1,975

List: $28,700. MedCon: EX. Prints digital radiology images on to 14 x 17 film. May be used to take images from:

CT scans
rad/fluoro room
MRIs
ultrasound machines
PET scanners
other radiology equipment that produces digital images.
wired for 110/220 VAC, 50/60 Hz

Comes with both send and receive magazines, as shown below. Unit removed from service October 15, 2004.

Shipping weight is about 300 pounds.

Laser imager camera - $1,475

List: $32,400. MedCon: EX. 3m laser imager plus, model 952 ABDV RECON laser camera. Takes images from a CT scan, r/f room, MRI or other digital image source and prints them on 14 x 17" film. Unit was brand new in November 1992.

Unit has extended range operators keypad, as shown, with cable.

May be set for operation on either 110 / 60 Hz or 220/240 VAC / 50 Hz.

Shipping weight is about 450 pounds.

Laser image - film processor package - $1,975

List: $72,400. MedCon: Ex. 3m model 959 laser camera, with Kodak M7 processor. Unit takes electronic images from a CT, MRI, R/f room or other imaging device. Then, it prints and develops the film.

Features:

unit new in June 1993
unit taken out of service 9/2002
processor is exceptionally clean
includes 2 film magazines
units are on wheels for easy relocation
includes interface electronics for network use
in very clean condition
camera can run film into both processor and/or a film reception magazine
wired for 110/60 ha, 220 / 50 Hz and 100 / 60 Hz, so may be used internationally and domestically

A view showing docking of camera to processor
Back view of the laser camera
Camera control panel, status display, remote keypad controller (usually installed near CT operator's panel) and network interface electronics
The film processor

Overall working dimensions of 2 units together:

length: 72"
width: 26"
height: 49"

Exterior dimensions of printer only:

length: 50"
width: 26"
height: 49"

Exterior dimensions of processor only:

length: 22"
width: 26"
height: 42"

Shipping weight is about 700 pounds total.

Laser image - processor package - $950

List: $79,400. MedCon: Ex. Dupont Linx laser imager model LP 400 with Dupont film processor. Unit takes electronic images from a CT, MRI, R/f room or other imaging device. Then, it prints and develops the film.

Features:

installed new on 4/1994
removed from service 9/2002
network compatible, includes Dupont Linx network computer server, not shown in photographs
with 3 cassettes and keypad
wired for 115 VAC 50/60 Hz

These laser cameras are sold, serviced and supported by Dupont.

The imager
the processor
How the imager fits onto the processor
Some id plates
keypad

Overall working dimensions of 2 units together:

length: 69"
width: 54"
height: 63"

Exterior dimensions of printer only:

length: 29"
width: 26"
height: 63"

Exterior dimensions of processor only:

length: 40"
width: 28"
height: 30"

Shipping weight is about 550 pounds.

Laser imager / processor combination - $1,975

List: $72,400. MedCon: Ex. 3m model 959 laser camera, with 3m Xp515 processor. Unit takes electronic images from a CT, MRI, R/f room or other imaging device. Then, it prints and develops the film.

Features:

field upgrades though 1996
unit taken out of service in 1997, put into storage
processor is exceptionally clean
with operators and service manual
includes 2 film magazines
units are on wheels for easy relocation
includes interface electronics for network use
in very clean condition
camera can run film into both processor and/or a film reception magazine

A view showing docking of camera to processor
Back view of the laser camera
Camera service report
Camera control panel, status display, remote keypad controller (usually installed near CT operator's panel) and network interface electronics

Processor control panel
Back view of the processor.
Service manuals

Laser camera - $975

List: $32,400. MedCon: F. In very good condition except had cosmetic damage to cover panels. 3m model 952 ABD-PT laser camera. takes images from a CT scan, r/f room, MRI or other digital image source and prints them on 14 x 17" film. Unit was brand new in November 1993. Refitted with a shock isolation system for transportation.

May be set for operation on either 110 / 60 Hz or 220 VAC / 50 Hz.

Shipping weight is about 450 pounds.

Laser camera / processor combination - $1,475

List: $73,400. MedCon: EX. Kodak laser camera linked to processor. Takes images for CT, MRI, digital fluoro room, ultrasound or other imaging source and prints them to 14 x 17" film, then develops them.

Kodak laser camera is a Kodak Ektascan laser imager. Processor is a Kodak model M7B. Prints in 1:1, 4:1, 9:1, 16:1 and 25:1 imaging modes.

2 complete systems in stock.

Shipping weight is about 750 pounds.

Laser camera - processor combination - $2,750

List: $75,300. MedCon: EX. Kodak model 1120 laser camera, with Kodak model 275 film processor. This system takes an image from and MRI, CT scan, R/f room, or other image source. Then it prints to film, sends the film to the film processor and develops it. Includes laser camera and matching film processor.

Features:

currently supported by Kodak imaging division.
unit was connected to a Phillips MRI system.
includes interface card
includes control monitor and keyboard shown in the following pictures
includes sends magazine and receive magazine
includes film densitometer for quality control of image
prints in single, multiformat, or mixed modes. For example you can set up the system to print 1,2,4,8, or 16 images all on one pieces film.
system also uses up to 4 different sizes of film.
includes Kodak 1120 users manual.

System is electronically controlled. Some of the setup screens are shown in the following pictures


An overview of the laser:



An overview of the processor:
An overview of the processor:

System was new in 1995, and under monthly maintenance until removal from service on January 27, 2000. Processor was flushed before removal, and unit shutdown in an orderly manner. System in excellent condition. Processor rollers in excellent condition.

Unit also comes with 3 large plastic tanks for processor chemicals.

This system uses a minimum of floor space. The camera occupies a footprint about two feet deep by 3 feet long, and the processor is about two feet long by 3 wide. Total floor space is less than 14 sq. ft. Shipping weight is about 800 pounds.

Laser camera - $975

List: $112,000. MedCon: VG. Dupont Linx laser imager model LHP. Features:

installed new on 3/22/91
removed from service 1/11/99
network compatible
with 3 cassettes
with 2 keypads
wired for 115 VAC 50/60 Hz

These laser cameras are sold, serviced and supported by Dupont.

© Copyright 1993-2008 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482