Production Engineering - Medical Equipment Division

PEMED home page6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Collimators for X-ray, radiology and fluroscopy

X-ray accessories - priced as shown

MedCon: VG. These are working units from various X-ray systems. Sold as replacement parts to keep older systems operational.

	Eureka Sapphire 150 TH X-ray tube, 150 max KVP Rad 40 insert, focal spots 0.6-1.5 Machlett Collimaster COLL-C-150 collimator Shipping weight is about 100 pounds	$1,675
	Shimadzu 54-60204 X-ray tube, 150 max KVP Rad 60 insert, focal spots 0.6-1.2 Shimadzu R-30 collimator Shipping weight is about 60 pounds	$1,475
	Picker PX355V X-ray tube 125 KVP max, 0.75 focus, R-T-M anode Picker LBD-01 collimator with cm dials Shipping weight is about 70 pounds	$1,475
	Eureka Sapphire 150 TH X-ray tube, 150 max KVP Rad 21 insert, focal spots 0.6-1.2 Shipping weight is about 65 pounds	$1,175
	Ralco R806 MP motorized collimator 4-pin and 21-pin connectors plastic mounting frame and spring-loaded legs Shipping weight is about 40 pounds	$975
	Fischer X-ray high speed starter, P/N 77100G-7 17 x 13.5 x 9.5 inches Shipping weight is about 55 pounds	$975

Collimator - $1,275 each

List: $2,700. MedCon: N. Machlett Collimaster C (COLL-C-150) pre wired model manufactured for Fischer Imaging. New in box.

Features:

manual shutter dials
field sizes indicated in inches and cm on scale attached to dials
rated up to 150 KVP
plates, screws, and jumpers included
lead shielded
active sequence indicator light
logic module
logic & lamp power supply; 120 V, 50/60 Hz., 24VAC output
cables
technical manual

Overall dimensions of the unit:

width: 7 in.
depth: 11.75
height: 9

Shipping weight is about 90 pounds. 2 units in stock.

X-ray collimator - $875

List: $7,300. MedCon: VG. Ralco R 302 MLP beam limiting device. manual dials

Features:

manual shutter dials
field sizes indicated in inches and cm on scale attached to dials
rated up to 150 KVP
2003 manufacture date

Overall dimensions of the unit:

width: 8.75 in.
depth: 11.25
height: 10.25

Shipping weight is about 30 pounds.

X-ray collimator - $875 each

List: $7,105. MedCon: N. Ralco R 302 MLP beam limiting device. under table model to be controlled by remote control device.

Features:

positioning of shutters controlled by potentiometers.
rated to 150 kVp
motorized control of shutters
no light field for x-ray field simulation.
2001 manufacture date
factory test report and instruction manual included

Overall dimensions of the unit:

width: 8.75 in.
depth: 10.5
height: 10.25

Shipping weight is about 30 pounds. 6 units in stock.

X-ray collimator- $750

List: $2,300. MedCon: G. Machlett Collimaster C, model Coll-C-150. The photo of a unit manufactured in 1998 is representative of the other units with dates of 1996, 2000 and 2002.

Features:

manual shutter dials
field sizes indicated in inches and cm on scale attached to dials
rated up to 150 KVP

Overall dimensions of the unit:

width: 7 in.
depth: 11.75
height: 9

Shipping weight is about 30 pounds. 1 unit in stock.

Under table collimator - $875 each

List: $4,500 MedCon: N. New in the box collimator, Machlett Collimaster model Coll-C-UT-150 LF. Also known as an under table, large field of view collimator rated to 150 Kv. These units are brand-new in the box, and were manufactured in the year 2001.

Includes:

mountings
assembler instructions
collimator logic power supply
cables
collimator power supply box
rated to 150 KV

4 units in stock. Shipping weight is about 115 pounds each.

X-ray collimator - $750

List: $4,200. MedCon: EX. Eureka X-ray model Linear FSE-DC.

Built June 1996. Also has a label from Fischer imaging (as shown in photo)

Shipping weight is about 50 pounds.

X-ray collimator - $1,275

List: $9,800. MedCon: N. Varian, model Collimaster 90 x-ray collimator. Unit is new in the box.

Features:

both traditional shutter style collimator vanes, and iris style collimator vanes
will match up to either an II, or a spot film device.
built in ultrasonic tape measure
built in laser aiming target (takes place of regular light bulb, when aluminium post collimation filter is installed, as shown in photo)
rated to 150 Kv

Shipping weight is about 75 pounds.

X-ray collimator - $750 each

List: $2,100. MedCon: N. Eureka collimator, made by linear, model FSE-DC. Unit is remote controlled, and would normally be mounted inside the x-ray table, looking up, in a fluoroscopy application. Fits picker and other x-ray machines

Shipping weight is about 75 pounds each.

2 units in stock.

X-ray collimator - $975 each

List: $6,400. MedCon: N. Ralco model 503 MP x-ray collimator. Made by Ralco, Italy.

This unit is the current product line of Ralco, please see their website at http://www.ralco.it/EnWeb/NewHome.htm

Features:

unit produces both round and square fields
for use with an image intensifier and spot film device by remote control.
rated to 150 kVp.
motorized positioning of shutter controlled by potentiometers.
electronic timer for light field activation.

6 units in stock. Shipping weight is about 75 pounds each.

X-ray collimator - $975 each

Ralco model R302 mp. Made by Ralco, Italy

Features:

positioning of shutters controlled by potentiometers.
rated to 150 kVp
motorized control of shutters
no light field for x-ray field simulation.

This unit is the current product line of Ralco, please see their website at http://www.ralco.it/EnWeb/NewHome.htm

3 units in stock.

X-ray collimator - $475

List: $9,000. MedCon: P. Siemens x-ray collimator. Unit appears to be new in the box, however has some shipping damage so we are selling this as parts only. Unit has both standard collimation vanes, and what appears to be an 8 element iris.

Shipping weight is about 75 pounds.

X-ray beam limiting cone, telescoping - $675

List: $750 each. MedCon: N, X-ray beam limiting cone, clips onto base of various collimators and provides a spot focussed beam. Usually used for Cheek, sinus, head and other small spot size shots.

Model S-90953, 10" x 4.24", Made by Varian, Machlett division, for Fischer Imaging.

X-ray beam limiting cone, telescoping - $475

List: $750 each. MedCon: N, X-ray beam limiting cone, clips onto base of various collimators and provides a spot focussed beam. Usually used for Cheek, sinus, head and other small spot size shots.

Model S-90955, 10" x 2.25", telescoping, made by Varian, Machlett division, for Fischer Imaging.

X-ray beam limiting cone - $475 each

List: $750 each. MedCon: N, X-ray beam limiting cone, clips onto base of various collimators and provides a spot focussed beam. Usually used for Cheek, sinus, head and other small spot size shots.

Model s-90950. Made by Varian, Machlett division, for Fischer Imaging. 10" x 4.25"

Shipping weight is about 50 pounds each. 2 units in stock.

X-ray collimator - $750

List: $3,300. MedCon: N. X-ray collimator, model Duocon M-100. made by Varian, Machlett division, for Fischer Imaging. Fits many types of basic x-ray systems, including Picker, Fischer, Trans World and others. Usually used in over-the table tube mode.

Units are new in the box, with cable, mounting hardware and instructions as shown.

Shipping weight is about 55 pounds.

X-ray collimator - $750 each

List: $3,800. MedCon: N. X-ray collimator model Collimaster C-UT 150, for under table mounting. Made by Varian, Machlett division, for Fischer Imaging.

Usually used in under table format, in a fluoroscopy table.

3 units in stock.

Shipping weight is about 75 pounds each.

Other collimators

GE Sentry III automatic collimator. Good condition, with 6 front buttons (long, Trans and vert) and 3 auxiliary buttons part # 46-177099G1 - $1,500
GE Sentry III control electronic cabinet, built 6/86, GE part # 46-193550G1 - $1,500
Phillips collimator, April 1980, PEI # 9804 602 60901 # B292 221, automatic overtable, with light - $750
Picker Collimatic II manual/ automatic collimator, built 2/78, in excellent condition. - $1,250
CGR collimator, new in June 1982, model # 726B951G16, with 23 pin connector, tape measure, manual and automatic operation - $950

© Copyright 1993 - 2010 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482