Production Engineering - Medical Equipment Division

PEMED home page6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Arthroscopy, systems and accesories

Arthroscopy set - $1,975

List: $8,300. Lasersonics model 2000 arthroscopy kit, arthroguide series. made of high quality surgical grade stainless steel, which appears to be gold plated.

Set contains the following instruments:

• trocar, blunt, 1508
• trocar, sharp, 1507
• deflector, 1506
• backstop, 1505
• smoke Evacuator, 1504
• arthroguide, 1501, two units
• tips and accessories, model 1502
• coupler, model 1008

Shipping weight is about 20 pounds.

Arthroscopy tower - $9,750

List: $55,600. MedCon: EX. Dyonics and Sony instruments. All components are dual voltage 220/120 except the 325 camera controller which is 120 V.

Features:

• rolling Cool Cart with
  • front (Plexiglas window for view of interior) and back doors, five shelves and bottom drawer
  • monitor pedestal with adjustable viewing angle
  • all equipment tied into a power bar with 15 foot cord
  • cord wrap
  • locking casters
• Sony PVM-20M2MDU color video monitor
• 2 EA, Dyonics Power arthroscopy shaver controller
• Dyonics 300XL xenon light source
• Dyonics Vision 325Z digital camera controller
• Dyonics Vision 625 digital capture system
• Sony UP-51MD color video printer
• shaver handpiece motor drive units,1 EA of the following --
  • PowerMax series, #7209891, 3 button control on motor drive
  • Power series, #7205354, 3 button control on motor drive
  • Power series, #7205355
  • Power series mini drive, #7205357
• 1 camera mount and 3 screw-in cameras (70° and 30° long needles and 30° short needle)
• 5 fiber optical cables
• 3 EA, Dyonics foot switches

	control panel, Sony PVM-20M2MDU color video monitor
	Dyonics Power arthroscopy shaver controller Sony UP-51MD color video printer
	Dyonics Vision 325Z digital camera controller Dyonics Vision 625 digital capture system
	Dyonics 300XL xenon light source Dyonics Power arthroscopy shaver controller
	bottom storage drawer with three Dyonics foot switches
	four different shaver handpiece motor drive units
	three cameras
	fiber optical cables

Overall dimensions of the unit:

• width: 33 in.
• depth: 27.25
• height: 74

Shipping weight is about 450 pounds.

Arthroscopy system - $7,275

List: $41,000. MedCon: VG. Concept cabinet with two pull-forward shelves, three stationary shelves, storage drawer, twin file bins for holding operating manuals, four locking casters, bottom bumpers, cord wrap and power bar with six AC outlets. System new in 1998.

System includes 2 camera heads and 2 scopes: dyonics 30 degree 4mm.

The cabinet is equipped with the following components (120 VAC) for two camera capability:

	Sony PVM-20M2MDU Trinitron color video monitor
	monitor controls
	Arthroscopy scope with video camera, 2nd camera in supply drawer
	Smith + Nephew/Dyonics 3-chip video camera system, Catalog no. 7205292 Smith + Nephew/Dyonics xenon XL light source, catalog no. 7205253 with Acmi, Olympus, Storz and Wolf coupling options
	Smith + Nephew/Dyonics 3-chip video camera system, Catalog no. 7205292 Sony Mavigraph UP-5650MDU/N color video printer
	supplies drawer

Overall dimensions of the unit:

• width: 28 in.
• depth: 28.5
• height: 68

Shipping weight is about 600 pounds.

Arthroscopy system - $7,500

List: $42,500. MedCon: VG. Concept cabinet with two pull-forward shelves, three stationary shelves, storage drawer, twin file bins for holding operating manuals, four locking casters, bottom bumpers and cord wrap. System new in 1998.

System includes 3 camera heads and 2 scope, dyonics 30 degree 4mm.

The cabinet is equipped with the following components (120 VAC) for two camera capability:

	Sony PVM-20M2MDU Trinitron color video monitor
	monitor controls
	Arthroscopy scope with video camera
	Smith + Nephew/Dyonics 3-chip video camera system, Catalog no. 7205292 Smith + Nephew/Dyonics xenon XL light source, catalog no. 7205253 with Acmi, Olympus, Storz and Wolf coupling options
	Dyonics AutoBrite Illuminator II light source, catalog no. 3180 Smith + Nephew/Dyonics digital video camera system, catalog no. 7204562
	supplies drawer

Overall dimensions of the unit:

• width: 28 in.
• depth: 28.5
• height: 68

Shipping weight is about 600 pounds.

Stryker Arthroscopy system - $5,750

List: $28,700. MedCon: VG. Stryker arthroscopy system. For arthroscopic surgical procedures on joints, for example on knees and shoulders.

This system includes:

• 30 degrees, 4 mm telescope (arthroscope), with superior quality optics
• single chip, solid state video camera model 592 with coupler
• Stryker SE5 shaver control console
• 19" high resolution Sony 1943md professional medical grade video monitor
• Stryker quantum 3000 high intensity 300 watt light source and light source supply cable
• large format 8.5 x 11" high resolution video printer
• rolling video cart

Shipping weight, with the cart, is about 350 pounds, without cart, 250 pounds.

All items are wired for 110/120 VAC, 50/60 Hz, for ease of adapting to international power requirements.

Arthroscopy pump - $1,750

List: $11,250. MedCon: EX. Linvatec 87K arthroscopy pump. 120 V, 50/60 Hz.

Features:

• maintains selected pressure and fluid flow rate independently of each other
• pressure set between 5 and 100 mm Hg automatic back-up pressure relief valve
• three flow rate ranges between 0 and 1350 ml/min --
  • high, up to 1350, can accommodate high suction equipment
  • medium, up to 405, debris removal
  • low, up to 135, diagnostic procedures
• digital pressure display and flow rate and pressure bar graphs
• touch pad sets
• uses disposable cassette tube set, product no. 87100
• audible alarm for overpower
• set-up guide and instruction manual included
• instruction manual describes appropriate pressure-sensing scope sheath sets from various manufacturers

Operation manual

Sample pages from the setup guide

Overall dimensions of the unit:

• width: 14 in.
• depth: 14
• height: 8.5

Shipping weight is about 40 pounds.

Arthroscopic generator - $1,475

List: $12,300. MedCon: VG. Arthrocare electro surgical system, model 2000. 100-240 V, 50/60 Hz.

Features:

• connectors for hand piece and footswitch
• touchpad arrows to set output
• adjustable audio volume
• power on/off rocker switch

Overall dimensions of the unit:

• width: 12 in.
• depth: 16
• height: 5.75

Shipping weight is about 20 pounds.

Arthroscopy pump - $675

List: $2,300. MedCon: VG. Storz continuous flow pump, model 27224P. 117 V, 50/60 Hz.

Features:

• pump speed control dial
• power on/off rocker switch with indicator light
• carrying handle.
• cord wrap

Overall dimensions of the unit:

• width: 9 in.
• depth: 12
• height: 7

Shipping weight is about 20 pounds.

Arthroscopy shaver - $750

List: $4,200. MedCon: VG. Smith + Nephew/Dyonics PS3500EP Arthroscopy surgical system. 120 V, 50/60 Hz.

Features:

• dial to switch between PS3500EP/PS3500, Mini and Universal probes, each with their individual connection ports
• LED windows show maximum, minimum and set speeds with push buttons for setting faster and slower speeds
• vertical bar graph indicates relative speed within selected range
• diagnostics window
• power on/off rocker switch with green indicator lamp
• built-in troubleshooting card and User's Manual included
• footswitch connector on front of instrument (footswitch not included)

Overall dimensions of the unit:

• width: 16.5 in.
• depth: 12
• height: 4.75

Shipping weight is about 25 pounds.

Arthroscopy irrigation pump - $1,475

List: $4,300. MedCon: VG. Future Medical Systems Arthro FMS Solo fluid management system. 120/230 V, 50-60 Hz.

Features:

• run/stop touchpad button with green indicator lamp
• digital display window
• pressure set touchpad arrows
• pressure cycle mode temporarily increases pressure to control bleeding
• foot switch and shaver connections on back of instrument; footswitch is included
• connector for remote control on front of instrument (remote control not included)
• red alarm light

Overall dimensions of the unit:

• width: 15 in.
• depth: 14
• height: 6.25

Shipping weight is about 40 pounds.

Arthroscopy power system - $2,750

List: $14,500. MedCon: VG. Stryker SE5 arthroscopy system. 120 V, 60 Hz.

Features:

• SE5 shaver included
• indicator lights for power on and mode selected
• hand piece and foot switch connectors on front panel with appropriate icons
• set speed is show in digital window and adjusted by touch pad arrows
  • low speed to 3000, adjustable by 300 rpm increments
  • high speed to 6000, adjustable by 600 rpm increments
  • oscillating speed to 1800, adjustable by 300 rpm increments
• foot switch 270-703 included

Overall dimensions of the unit:

• width: 9.5 in.
• depth: 14.5
• height: 5

Shipping weight is about 30 pounds.

Arthroscopy shaver system - $2,750

List: $12,750. MedCon: VG. Stryker TPS endoscopy system, ref. 5100-1.100-120 V, 50-60 Hz.

Features:

• TPS two-pedal foot switch, ref 275-701-400
• variable speeds, up to 75,000 rpm for a high speed drill
• hand piece and foot switch connectors on front panel with appropriate icons
• touch screen sets and program editing and storage
• integrated irrigation option
• multiple hand piece capability
• Quick Reference Guide attached to top of instrument

Overall dimensions of the unit:

• width: 11.75 in.
• depth: 10.75
• height: 7

Shipping weight is about 25 pounds. 2 units in stock.

Arthroscopy fluid management system - $1,275 each

List: $8,240. MedCon: VG. Dyonics/Smith+Nephew Intellijet Arthroscopy fluid management system. 100-120 V, 50/60 Hz.

Features:

• high inflow and outflow for uniform joint distention and clear visualization
• can communicate with a Dyonics power Shaver system for refined fluid control
• 2 level sensors on adjustable height pole for fluid bags
• supply drawer
• RS-232C connector
• 3-socket power bar
• cord wrap

Overall dimensions of the console:

• width: 16.5 in.
• depth: 11.25
• height: 6

Overall dimensions of the unit:

• width: 20 in.
• depth: 22
• height: 74.5

Shipping weight is about 160 pounds. 2 units in stock.

Arthroscopy pump - $1,375 each

List: $6,532. MedCon: VG. Wolf model 2202 arthroscopy pump. 100-240 V, 50/60 Hz.

Features:

• digital display of set pressure, set flow and actual pressure with touch pad arrows for setting
• tubing threads through peristaltic pressure plates on front of instrument for continuous observation
• last used settings may be stored
• footswitch connector on back

Overall dimensions of the unit:

• width: 14 in.
• depth: 13.5
• height: 6

Shipping weight is about 30 pounds. 2 units in stock

Arthroscopy pump - $1,475

List: $7,325. MedCon: EX. Biomet/Arthrotek Power Pump II, model 906030R. 120 V, 50/60 Hz. 200 W

Features:

• digital and graph displays of flow (100-800 ml/min) and distention pressure (0-160)
• Power Pump 800 shaver interface included
• pump cartridge (not included) attaches to front of instrument
• push buttons to set pressure and flow
• push button controller pad included

Overall dimensions of the unit:

• width: 16 in.
• depth: 18
• height: 8

Shipping weight is about 70 pounds.

Arthrotome power console - $875

List: $4,870. MedCon: VG. Amsco/Hall arthrotome power console. 120 V, 60 Hz.

Features:

• 25 Watt output
• 5-speed control
• rotate and rotate/oscillate modes
• battery charge indicator

Overall dimensions of the unit:

• width: 10 in.
• depth: 6
• height: 8

Shipping weight is about 25 pounds.

Arthroscopy power unit - $375

List:2,145. MedCon: VG. Dyonics Model 40.Uses battery charger.

Overall dimensions of the unit:

• width: 10 in.
• depth: 8.5
• height: 5.5

Shipping weight is about 35 pounds.

Arthroscopy power unit - $575 each

List: $4,300. MedCon: VG. Dyonics Model 85.Uses battery charger.

Overall dimensions of the unit:

• width: 10 in.
• depth: 8.5
• height: 5.5

Shipping weight is about 35 pounds.

2 units in stock

3M Arthroscopy pump - $975 each

List: $6,540. MedCon: EX. 3M model 87000 arthroscopy pump. Uses peristaltic pump action to precisely control fluid flow and volume.

Features:

• digital controlled distension pressure
• digital display of distension pressure, both set and actual
• display of flow
• uses disposable cassette, also can use tubing through

Shipping weight is about 50 pounds each. 3 units in stock.

Arthroscopy pump - $975 each

List $4,400. MedCon: EX. 3M model 8300 arthroscopy pump.

Features:

• all digital controls
• peristaltic type pump mechanism
• wired for 120 VAC 50/60 Hz
• digital display of actual and set point for distention pressure, mm Hg
• digital display of flow rate, ml / min
• setting for standard or small joint systems

2 units in stock. Shipping weight is about 65 pounds each

© Copyright 1993- 2008 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482