PEMED home page6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482
|
|
List: $6,340. MedCon: VG. Biomet/Alliance profile broaches with 2 handles, case no. 3.
Biomet product number 595553. Complete set of broaches, except for 18 and 19 mm.
Overall dimensions of the case:
3 units in stock with 2 rasp handles as shown and 3 additional cases with the same assortment of broaches and a single handle.
Shipping weight is about 15 pounds.
 |
 |
 |
List: $7,000. MedCon: VG.
Biomet Ascent augments & stems case. Biomet product number 595083. Complete set.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
List: $5,900. MedCon: VG.
Biomet Ascent P/S constrained bearing trials. Biomet product number 595081. Complete set.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
 |
List: $5,900. MedCon: VG. Biomet Ascent tibial augment/stem extension trials. Biomet product number 595068. Incomplete set.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
 |
List: $8,320. MedCon: VG. Biomet Ascent revision femoral case. Biomet product number 595084. Includes alignment tower, drill bits, box chisel, hex driver, contour blocks, bone nails, reamer guide, guide body, and sizing templates.
Overall dimensions of the case:
Shipping weight is about 25 pounds.
 |
 |
List: $7,016. MedCon: VG. Biomet Alliance broach provisionals, case no. 3. Biomet product number 592902. Complete set of broaches from 7 to 19 mm, with duplicates of 7, 9, 11, 13, 15 and 17 mm.
Trimmer and extraction tool not included. We can provide a handle from another broken set.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
List: $5,617. MedCon: VG. Biomet Ascent closed box P/S femoral trials.
Biomet product number 595077. Complete set.
Overall dimensions of the case:
Shipping weight is about 25 pounds.
 |
 |
List: $7,016. MedCon: VG. Biomet Alliance reamers and storage case no. 2. Biomet product number 595522. T handle and the following reamers: 7 x 115, 8 x 145, 9 x 125, 10 x 130, 11 x 135, 12 x 140, 13 x 145, 14 x 150, 15 x 155, 16 x 160 and 17 x 165 mm.
18, 19 and 20 mm reamers not included.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
List: $7,018. MedCon: VG. Biomet Alliance reamers and storage case no. 2. Biomet product number 595522. T handle and the following reamers: 7 x 115, 8 x 120, 9 x 125, 10 x 130, 11 x 135, 12 x 140, 13 x 145, 14 x 150, 15 x 155, 16 x 160 and 17 x 165 mm. 18, 19 and 20 mm reamers not included.
Gold nitride ends to aid in monitoring insertion depth.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
 |
List: $7,200. MedCon: VG. Biomet Mallory-Head rasp/provisionals. Biomet product number 592014.
The following reamers are included: 7 x 140, 8 x 145, 9 x 150, 10 x 155, 11 x 160, 12 x 165, 13 x 170, 14 x 175, 15 x 180, 16 x 180 and 17 x 180 mm.
Overall dimensions of the case:
Shipping weight is about 25 pounds. 2 identical units in stock.
 |
 |
List: $7,850. MedCon: VG. Biomet Maxim tibial trialing instrumentation, case # 4. Biomet product number 592208.
Near complete set of trials, bearing puller, plate handle and tibial templates in the following sizes, 63, 67, 71, 75, 79, and 83 mm.
Overall dimensions of the case:
Shipping weight is about 15 pounds.
 |
 |
List: $4,200. MedCon: VG. Biomet even numbered grater reamers. Biomet product number 592153.
Incomplete set includes 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66 and 68 mm.
Overall dimensions of the case:
Shipping weight is about 15 pounds.
 |
 |
List: $6,700. MedCon: VG. Biomet Ringloc Acetabular Series insertion/extraction instruments. Biomet product number 592030. Includes 2 ea. of shell extractor plates 41/21, 43/23, 44/24, 45/25, and 46/26. Includes the following impactor plates, 2 ea. of 48/28 and 47/27 mm, and 1 ea. of 46/26, 45/25, 44/24, 43/23, and 42/22 mm. The extractor tool is part number 423619.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
List: $4,650. MedCon: VG. Biomet femoral intramedullary nail, instrument case # 2. Biomet product number 592025.
Partial set with instruments as shown in the photographs.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
 |
List: $5,420. MedCon: VG. Biomet femoral intramedullary nail, instrument case # 2. Biomet product number 592025.
Partial set with instruments as shown in the photographs.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
 |
List: $6,080. MedCon: VG. Biomet Mallory-Head long stem provisional set. Biomet product number 592130.
Top and bottom trays each contain the following provisionals, accounting for 2 of each; 9 x 200, 11 x 200, 13 x 200, 15 x 200, 17 x 200, 9 x 250, 11 x 250, 13 x 250, 15 x 250, 17 x 250 mm.
Overall dimensions of the case:
Shipping weight is about 25 pounds.
 |
 |
List: $3,475. MedCon: VG. S & T Tupper's universal hand holder and retractor.
S & T product number TH-101 or No. 976.
Overall dimensions of the case:
Shipping weight is about 10 pounds.
 |
 |
List: $7,800. MedCon: VG. Mueller Collis interspace shapers (retractor blades).
Product number 9195-001. Complete set from 8 to 20 mm.
Overall dimensions of the case:
Shipping weight is about 10 pounds.
 |
 |
 |
List: $8,800. MedCon: VG. Biomet tibial nail instrument case. Biomet product number 595090.
Complete set of instruments as shown in the photographs.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
List: $8,100. MedCon: VG. Biomet Repicci II pre total knee. Biomet product number 595026.
Includes femoral trials, tibial trial bearings, femoral drill guides, Haverfield Scoville retractor, femoral turbo inserter, femoral turbo driver, and slap hammer.
Overall dimensions of the case:
Shipping weight is about 20 pounds.
 |
 |
List: $6,700. MedCon: VG. Acuflex ACL drill system.
Drill bits and sleeves and extractor hooks.
Overall dimensions of the case:
Shipping weight is about 10 pounds.
 |
 |
List: $9,000. MedCon: VG. Kirschner Medical TC-IV trials.
Tibial, femoral and patellar trials, sizes as shown in the photo.
Overall dimensions of the case:
Shipping weight is about 30 pounds.
List: $11,200. MedCon: VG. Howmedica Monogram IM revision instrument system R2 IM reamer case. Product number 6633-9-972. Complete three tray case containing instruments as shown in the photo of the top tray and in the middle and bottom trays are reamers of the following sizes, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 and 23 mm.
 |
 |
 |
Overall dimensions of the case:
Shipping weight is about 30 pounds.
List: $2,200. MedCon: VG. Zimmer 22.9 cm (9 inch) pins and wires, case 424-90. Fold open/close case with 0.9, 1.1, 1.6, 2.0, 2.4, 2.8, 3.2, 3.6, 4.0 and 4.8 mm.
Four to seven wires in most slots except 2.4 mm.
Overall dimensions of the case:
Shipping weight is about 5 pounds.
List: $6,300. MedCon: VG.
Non implantable broaches with one rasp handle.
2 ea of 8 x 120, 10 x 135, 12 x 140, 14 x 150, and 16 x 165 mm.
Shipping weight is about 10 pounds.
List: $600. MedCon: VG.
Cement gun, model K392979.
Shipping weight is about 5 pounds.
 |
 |
 |
List: $5,230. MedCon: VG.
DePuy LCS knee bridging bearing total knee trials.
Overall dimensions of the case:
Shipping weight is about 30 pounds.
 |
 |
List: $8,200. MedCon: VG. Biomet Maxim femoral instruments. Biomet product number 595203. Partial set with instruments as shown in the photographs.
Includes T handle and cut block handle. Missing angle attachments and reference blocks.
Overall dimensions of the case:
Shipping weight is about 25 pounds.
 |
 |
 |
List: $6,200. MedCon: VG. Biomet AGC knee instrumentation. Biomet product number 592111.
Two trays appear to constitute a complete set.
Overall dimensions of the case:
Shipping weight is about 35 pounds.
 |
 |
 |
List: $7,300. MedCon: VG. Primary total knee set.
Includes flexion spacer blocks, 8, 10, 12, 16 and 20 mm. AP femoral positioner, AP femoral trimmers, 55RL,60RL, 65LR, 70RL and 75RL, alignment rod, tibial chisel guide, knee alignment jig
Overall dimensions of the unit:
Shipping weight is about 30 pounds.
List: $7,600. MedCon: VG. Biomet Mallory-Head calcar provisional set. Biomet product number 592131.
Right and left 34 and 55 mm provisionals, miscellaneous tools and bits and extra provisionals.
 |
 |
 |
Overall dimensions of the case (missing lid):
Shipping weight is about 30 pounds.
List: $6,700. MedCon: G. Biomet Ringloc acetabular series shell gauges, alignment gauges and cutting blocks. Biomet product number 592031.
Photograph indicates a near complete set of shell gauges, but several tools are missing.
Overall dimensions of the case:
Shipping weight is about 15 pounds.
 |
 |
List: $8,350. MedCon: VG. Biomet Vanguard tibial prep instruments. Biomet product number 595312.
Includes tibial stylus, alignment gauge, trimmers and various sized trials and templates.
Overall dimensions of the unit:
Shipping weight is about 35 pounds.
List: $1,800. MedCon: VG.
Zimmer and Brown meniscal instrument set with 15 x 15 in. fabric storage mat with pockets.
Shipping weight is about 3 pounds.
List: $4,800. MedCon: VG. Biomet Hammer mini external fixator set. Lot of two incomplete cases.
Includes connecting bars and clamp assemblies but each case is missing same components (see empty wells in the photo).
Overall dimensions of the unit:
Shipping weight is about 5 pounds.
 |
 |
List: $1,700. MedCon: VG. Storz and Zimmer surgical instrument set.
Includes 3 forceps, skin retractor, mallet, 2 large and 1 small nasal specula, bone clamp, mouth gag, scissors as shown and 2 Hall oscillator blades.
Shipping weight is about 3 pounds.
MedCon: Cosmetically G but some are INC. These are instrument sets that we are not sure of their completeness or proper sorting in the cases.
| 1. | $1,275 |  |
self centering trial prosthesis |
| 2. | $475 |  |
Biomet tools |
| 3. | $550 |  |
De Puy total knee alignment device XII |
| 4. | $1,100 |  |
tools including rasp handle, mallet, extractor and reamers |
| 5. | $925 |  |
Biomet handles and alignment tools |
| 6. | $975 |  |
rods and clamps |
| 7 | $375 |  |
forceps and wires |
| 8 | $875 |   |
Zimmer external fixation rods and clamps |
| 9 | $750 |   |
Biomet reamers, 11, 12, 13, 15, 16, 17, 18, 21 mm |
| 10 | $850 |   |
miscellaneous trials trials in tray have 8, 10, 12, 16, and 20 mm thickness |
| 11 | $275 |  |
femoral trials, tools missing |
| 12 | $275 |  |
retractor, we think |
List:$8,000. MedCon: N. Zimmer Harrington spinal instrument patient sets, including distraction rods and Hoffman type connecting rods.
Shipping weight is about 25 pounds.
 |
 |
 |
 |
 |
 |
 |
 |
 |
List: $5,000. MedCon: N.
Zimmer Knowles pins, about 65 pieces total, with T handle.
Shipping weight is about 25 pounds.
 |
 |
 |
List: $7,000. MedCon; N. 2 trays of joint implants.
Shipping weight is about 30 pounds.
List: $8,500. MedCon: N. Zimmer orthopedic implants, external fixation accessories.
Consists of the following items:
Shipping weight is about 30 pounds.
List: $3400. MedCon: N. Depuy and kirchner medical. Consists of:
Shipping weight is about 7 pounds.
List: $8,200. MedCon: VG. Fixation clamps, to be used with Knowles pins, for external spine fixation.
Approximately 15 pieces, as shown in photograph.
Shipping weight is about 15 pounds.
unused Knowles pins, as shown in photograph, made by Zimmer.
Shipping weight is about 5 pounds.
List: $3900. MedCon: N. New in the box set of Knowles pins, as shown in photograph, made by Zimmer medical.
Includes rack as shown in photograph.
Shipping weight is about 10 pounds each. Two sets in stock.
List: $8,000. MedCon: VG. Zimmer . Top of case is inscribed 'self compressing plate set'. Contents as shown in photographs.
Overall dimensions of the case:
Shipping weight is about 15 pounds.
list: $17,300. MedCon: EX. Set of Knowles pins. Made by Richard's medical.
 |
 |
 |
Includes:
Over 300 pieces total.
List: $14,854. MedCon: N. VSP Orthopedic Implant set by Acromed. Contains items as shown in the photographs, such as plates, screws, nuts and tissue protectors.
|
|
|
Stainless steel sterilization and organization case.
Shipping weight is about 25 pounds.
List: $26,700. MedCon: N. Assortment of spinal plates, fixation screws, rods and power tools from Synthes USA.
| Overview of assortment |
 |
|
| 13 spinal plates |
 |
 |
| 5 soft tissue protectors |
 |
 |
| 15 spinal expansion screws |
 |
 |
| 9 drills, 2 reamers |
 |
 |
Shipping weight is about 10 pounds each.
List: $13,800. MedCon: N. Synthes long cervical spinal plates.
Implantable devices for fixation for spinal work.
Contains quantities as shown in photos. Shipping weight is about 20 pounds.
With sterilization case.
© Copyright 1993 - 2009 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.
6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482
