Production Engineering - Medical Equipment Division

PEMED home page6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482

Hyperthermia and Hypothermia units

Patient warming system - $750

List: $5,600. MedCon: G. Augustine Medical Bair Hugger model 200 patient warnings system. 120 V, 60 Hz.

Features:

• low (90°F/32.2°C), medium (100°F/37.8°C)and high (110°F/43.3°C) heating settings
• indicator lights for power on and overheat
• automatic overheat shut off
• storage bins under lid for tubing and blankets
• locking front casters
• 14 1/2 foot power cord with hospital grade plug

Overall dimensions of the unit:

• width: 22.5 in.
• depth: 12
• height: 26

Shipping weight is about 55 pounds.

Patient warming system - $875

List: $3,100. MedCon: G. Bair hugger patient warming system, made by Augustine medical systems. Used to provide warm air for a patient.

Features:

• for treating hyperthermia
• portable heater/blower unit
• uses disposable blankets, not included

Shipping weight is about 100 lbs.

Patient cooling/warming system - $1,275

List: $7,300. MedCon: VG. Pharmaseal K Thermia patient cooling/warming system, model RK1000

Features:

• rolling unit on four casters
• set dials for fluid and patient temperature
• patient probe connectors
• LED windows show fluid and patient temperatures
• warning indicators
• transport handle and hose connectors on back of unit
• 14 foot power cord with hospital grade plug
• instructions printed on instrument
• cord wrap

Overall dimensions of the unit:

• width: 18.5 in.
• depth: 22
• height: 36

Shipping weight is about 150 pounds. 2 units in stock.

Localized cold therapy unit - $1,275

List: $5,600. MedCon: VG. CSZ Electri-Cool model 757 hypothermia unit. 110-120 V, 60 Hz.

Features:

• uses 15 x 22 in. water pad
• includes bed bracket (cat. no. 757-BBK) and Temp-Stand (cat. no. 757-MST)
• continuous and alternating modes
• LED windows for water and skin temperature
• °C/°F toggle
• set point arrows for patient and water on touchpad, 4 to 20°C range for water, 10 to 30°C patient range
• add water and low limit indicator lights
• water reservoir on back of unit with hose connectors on side
• 10-13 gph flow rate through pad
• test port and skin probe connector
• cooling unit has drawer for replaceable filters
• operating instructions printed on front of unit
• power on/off rocker switch with green indicator lamp

Overall dimensions of the cooling unit:

• width: 12 in.
• depth: 7.75
• height: 13

Overall dimensions of the cooling unit on stand:

• base of stand: 22 x 22 in.
• height:43

Shipping weight is about 30 pounds for the cooling unit alone or 50 pounds including the stand.

Patient hyper/hypothermia unit - $1,375

List: VG. MedCon: G. Gaymar Auto-Meditherm model MTA-4700 patient warming and cooling unit. 115 V, 60 Hz.

Features:

• water inlets and outlets for two patient blankets
• digital display windows show blanket and patient temperatures in degrees C; there is a C/F conversion chart on the machine
• rolling cart
• nine feet of tubing
• patient probe connector on from of machine
• alert lights for low water flow, check patient temp setting and check probe
• instruction card pack
• alarm and alarm silence
• 15 foot hospital grade power cord

Overall dimensions of the unit:

• width: 14 in.
• depth: 18
• height: 37.5

Shipping weight is about 130 pounds. 2 units in stock.

Patient hyper/hypothermia unit - $750

List: $4,900. MedCon: G. Gaymar Monitrol model HS03000C patient warming and cooling unit. 115 V, 60 Hz. Has some cracked moulding.

Features:

• rolling cart.
• temperature control dial (40-107 degrees F; 5-42 dergrees C)
• blanket temperature gauge (reads 0-140 degrees F; -7-60 degrees C)
• patient temperature gauge (80-110 degrees F; 27-43 degrees C); need patient probe to use this feature
• water inlets/outlets for three pads; 1 tubing set included
• patient signal light
• circuit breaker

Overall dimensions of the unit:

• width: 20.5 in.
• depth: 20.5
• height: 37.5

Shipping weight is about 130 pounds.

Hyper/Hypothermia unit - $975

List: $6,200. MedCon: VG. Seabrook Tropi-Cool patient warming and cooling unit, model SMS-5200. 115 V, 60 Hz.

Features:

• LED display of water and patient temperatures
• touchpad arrows for set point
• degrees C/degrees F toggle
• alert lights for add water, high limit and low limit
• hoses included
• water fill cap on back of unit
• alarm and alarm silence
• instructions printed next to control panel
• handles for lifting

Overall dimensions of the unit off of stand:

• width: 13.75 in.
• depth: 16.5
• height: 15.5

Shipping weight is about 60 pounds. 2 units in stock

Hypothermia / hyperthermia unit - $2,750

List: $8,760. MedCon: New. Unit is unused clinically, still has warranty card attached. Gaymar model MTA-4700, also called a Medi-therm.

Includes 220 VAC, 50 Hz voltage adapter, so unit may be used on either 110 or 220 VAC, 50/60 Hz.

Features:

• unit is brand new in box, clinically unused
• digital display of blanket water temperature
• digital display after patient temperature
• automatic/manual control
• adjustable blanket water temperature
• adjustable automatic patient temperature
• status lights for heat, cool, and in temperature zone
• warning lights for check water flow, check patient temperature settings, and check patient probe

Shipping weight is about 200 pounds. Also have a second unit in stock, MedCon: VG, price is $1,450.

Mini hypo / hyperthermia unit - $975 each

List: $2,650. MedCon: EX. American Medical Systems Mini K-Thermia unit. Used to heat or cool patients. Uses disposable water blankets (not included). Unit either heats or cools an internal reservoir of water, which is then pumped through blanket to regulator the temperature of patient.

These are very small units, about 3' high and 6 inches wide x 9 inches deep.

4 units in stock.

Patient temperature controller - $1,250 each

List: $7,900. MedCon: VG. Cincinnati Subzero Blanketrol II patient thermoregulator. For Hyper-Hypothermia. Used to keep patient either warm or cold during ER and surgical procedures. Unit supplies a water filled blanket (blanket is not included) with temperature controlled water, either heated or chilled, depending on patients temperature. has a connection for patient temperature probe, with may be internal (rectal) or other probe.

Features:

• digital display of blanket water temperature
• digital set point
• digital display of patient temperature
• on castors
• has small reservoir for water on top
• instructions for use are printed on top
• has user manual
• quick disconnect connections for water and blanket hoses
• by Cincinnati Sub Zero

4 units in stock.

Portable patient thermoregulator

List: $3,450. MedCon: G. Hot / Ice system 3 portable thermoregulator. After power up, flashed "need service message" probably due to missing sensor. Temperature setting are digitally controlled. Uses temperature sensor and extended fluid reservoir. By In-care medical products, on wheeled "travel-along" style stand.

Small, compact unit.

Heater / cooler - $1,250

List: $6,230. MedCon: G. Seabrook heater/cooler, Dual-Temp model SMS-5000. "Cardioplesia" unit. Digitally controlled heating and cooling unit for use during open heart surgery. On stand on castors. Uses heated, or cooled water bath to control temperature of body fluids. Also one unit without stand, $1,100

© Copyright 1993 - 2010 by Production Engineering. PEMED® is a registered trademark of Production Engineering. MedCon is also a trademark of Production Engineering. All rights reserved. Contact PEMED for license requests. The usual copyright notices and disclaimers. Except for search engines or link listing, no part of this website, including derived information, may be republished without express written permission and payment of fees.

Production Engineering - Medical Equipment Division

6035 E. 38th Avenue, Denver, Colorado 80207 USA (303) 393-7800 FAX (303) 393-1482